Welcome, Guest
Username: Password: Remember me

TOPIC: CTL01-D with a telemetry capable receiver

CTL01-D with a telemetry capable receiver 05 Nov 2012 20:54 #2705

  • FDR
  • FDR's Avatar
  • Online
  • Posts: 2403
I just wonder what happen, if you use the CTL01-D telemetry module with a telemetry capable receiver, like the RX802, RX1002 or an all-in-one type of the newer helis/quads, which sends back battery voltage and/or motor temperature.
Will they both transmit and interfere with each other?
Has anybody tried such config?
Last Edit: 07 Nov 2012 08:44 by FDR.
The administrator has disabled public write access.

CTL01-D with a telemetry capable receiver 06 Nov 2012 13:48 #2728

  • vlad_vy
  • vlad_vy's Avatar
  • Offline
  • Posts: 1537
RX802 hasn't any telemetry output and works with CTL01-D telemetry module without problem.
The administrator has disabled public write access.

CTL01-D with a telemetry capable receiver 06 Nov 2012 14:01 #2730

  • FDR
  • FDR's Avatar
  • Online
  • Posts: 2403
Oops, my bad. :oops:
Somehow I remembered that they do send back their battery voltage...

But the question is still valid about the all-in-one receivers, which support telemetry like the Master CP's RX2637H-D, or the Hoten X's RX2635H-D.
It probably wouldn't fit into the smaller ones...
Last Edit: 06 Nov 2012 14:02 by FDR.
The administrator has disabled public write access.
Time to create page: 0.088 seconds
Powered by Kunena Forum