View Issue Details Jump to Notes ] Issue History ] Print ]
IDProjectCategoryView StatusDate SubmittedLast Update
0000640Deviation(No Category)public2015-10-08 19:122016-09-19 20:54
Assigned To 
Summary0000640: Telemetry possibility to view min/max value and or count the nr of samples below some set threshold.
DescriptionAfter flight would be interesting to see nr of samples below some set RSSI,or the minimum cell voltage during load, or the maximum peak of amps pulled.

 a min value max value and a threshold level, were the nr of samples below threshold are counted.

Feature not to be confused with a full telemetry logging in the tx.
Steps To Reproducefeature.
TagsNo tags attached.
Deviation Version
Attached Files

- Relationships

-  Notes
mwm (developer)
2015-10-08 19:40

Why would you want this instead of data logging? Especially when we already have data logging?
Thomas.Heiss (reporter)
2016-09-19 09:31
edited on: 2016-09-19 09:31

Because Spektrum transmitters support that on a 2nd/3rd telemetry page and you can see that immediately after flight on display without having to plug in USB and use your computer / laptop.

It is quite practicable to see e.g min RxV (if that may even work out short power peaks) and e.g <=4,3V RxV telemetry alarms.

You actually have to reset min/max once you plug in your flight pack lipo as plugging in creates the wrong values (tested with Spektrum DX8G1).

May be same true for altimeter (I did not test).

FlightLog FrameLosses time interval / delta / threshold:
I opened a new DSM telemetry thread for FrameLosses: [^]

- Issue History
Date Modified Username Field Change
2015-10-08 19:12 Fernandez New Issue
2015-10-08 19:40 mwm Note Added: 0001499
2016-09-19 09:31 Thomas.Heiss Note Added: 0001625
2016-09-19 09:31 Thomas.Heiss Note Edited: 0001625 View Revisions

Copyright © 2000 - 2018 MantisBT Team
Powered by Mantis Bugtracker