1. Forum
  3. Search

Advanced Search

Search Results (Searched for: irx-ir8m)

  • MIMI53
  • MIMI53's Avatar
17 May 2018 20:21
Replied by MIMI53 on topic iRangeX iRX-IR8M 2.4 G 8CH baséo

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Merci de votre aide concernant le firmware
  • MIMI53
  • MIMI53's Avatar
17 May 2018 20:20
Replied by MIMI53 on topic iRangeX iRX-IR8M 2.4 G 8CH multiprotocole

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Non je ne suis pas en mesure de faire cela, c est pour cela que je cherche le firmware d origine
  • vlad_vy
  • vlad_vy's Avatar
17 May 2018 11:17
Replied by vlad_vy on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

I think you can use devo7e-256 emulator, but replace "hardware.ini" with "hardware.ini" from IR8M. The only thing that will not work correctly - import model files from other Deviation transmitters.
  • mlangstr
  • mlangstr's Avatar
17 May 2018 11:13
Replied by mlangstr on topic IRangeX iRX-IR8M does not bind to DSM2 receivers

IRangeX iRX-IR8M does not bind to DSM2 receivers

Category: Feedback & Questions

Thanks Vlad that really helped.

I moved the sticks during the countdown and the receiver binded..
Then I made he mistake of turning the tx off and on again... and the signal was gone..

I thought that the on/off bug of the tx was solved with the second version but there seems to be some thing still wrong there. If I turn the TX off and wait 20 seconds and turn it on again everything is fine again.

That is a very workable workaround for me.

Thanks a lot for your help.

Maarten
  • LOL789
  • LOL789's Avatar
17 May 2018 11:05
Replied by LOL789 on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

The development of an emulator for ir8m (deviation-emu-ir8m-v5.xx...) planned?

thanks
  • Alvarez
  • Alvarez's Avatar
17 May 2018 05:35
Replied by Alvarez on topic iRangeX iRX-IR8M 2.4 G 8CH multiprotocole

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

But the big problem that the module have is that there are two pins shorted or more depending on the TX
Because of that the company are changing the module un version 2
If you are able to remove the short I think that the problem can be solved
  • vlad_vy
  • vlad_vy's Avatar
17 May 2018 03:41 - 17 May 2018 03:41
Replied by vlad_vy on topic IRangeX iRX-IR8M does not bind to DSM2 receivers

IRangeX iRX-IR8M does not bind to DSM2 receivers

Category: Feedback & Questions

DSM protocols binding wait stick move, it's for failsafe values you can enter at protocol properties. If you don't need failsafe simply move any stick after countdown.
  • sfjuocekr
  • sfjuocekr's Avatar
17 May 2018 00:01
Replied by sfjuocekr on topic iRangeX iRX-IR8M 2.4 G 8CH multiprotocole

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

I figured out my misconception regarding the "module" and its firmware, after inspecting said "module". The actual RF board indeed has no firmware, it just uses CS lines and the board the "module" comes with runs the STM32 with firmware.

Once I get it swapped out and do some testing with it over the coming days, I'll report back if it fixed the dropouts.

I have an electronics and programming background, don't worry ;)
  • mlangstr
  • mlangstr's Avatar
16 May 2018 20:52
IRangeX iRX-IR8M does not bind to DSM2 receivers was created by mlangstr

IRangeX iRX-IR8M does not bind to DSM2 receivers

Category: Feedback & Questions

Hi there,

I've just received my Irx-ir8m to use along with my dx6i but I'm running into problems binding with any receiver.
I've tried binding with a wireless dongle (for simulators) and with a tiny 7x. They both bind fine with the dx6i but when I try to bind it with the Irange it get stuck after the countdown (unless I move the right stick or the enter key) I have had it bind to the wireless dongle once and once it did that it worked nicely.

I've tried all the dsm2 options but that doesnt seem to do the trick.

I've also updated the firmware to ir8m-v5.x.x-2018-05-14 but that doesnt make a difference.

the irange does bind to the supplied receiver without any issues.

Maarten
  • vlad_vy
  • vlad_vy's Avatar
14 May 2018 04:41 - 29 May 2018 04:25
Replied by vlad_vy on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

Since iRangeX iRX-IR8M (t8sg-v5.x.x-2017-09-19) is somewhat different from Jumper T8SG I will place here the builds for iRangeX iRX-IR8M.

Previous changes:
* RUD and AIL reversed to comply with common direction for Deviation.
* AUX4 and AUX5 reversed to comply with common direction for Deviation.
* All switches reversed to comply with common direction for Deviation.
* batt_critical set to 3900 since iRX-IR8M can use 4xAA battery.
* LCD Internal Resistor Rate (Rb/Ra) set to 4 (0x24).
* Add support for 6 independent trims set.
* Add protocol for Corona V1/V2 and Flydream V3, from hexfet
* Support 16 channels for FrskyX and 14 for AFHDS-2A, from hexfet
* Fix Corona protocol, from hexfet
* More reliable and beep only once "beep" mux
* More reliable and sound only once "voice" mux

Changes:
* Don't identify as USBHID mouse (fixes USBHID on Mac OSX), from netmute

(2018-05-14)
iRangeX iRX-IR8M based on Nightly Builds:

Files deleted, see Nightly builds...
  • MIMI53
  • MIMI53's Avatar
13 May 2018 20:21
Replied by MIMI53 on topic iRangeX iRX-IR8M 2.4 G 8CH multiprotocole

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Bonjour je cherche le
firmware t8sg-v5.x.x-2017.zip en téléchargement
car j ai fait une mise à jour et maintenant mon ecran est noir
  • Original
  • Original's Avatar
13 May 2018 08:53
Replied by Original on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Testing iRangeX iRX-IR8M with DYS ELF and GP90 micro drones.

  • maxx
  • maxx's Avatar
11 May 2018 19:18
Replied by maxx on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

Merci
  • vlad_vy
  • vlad_vy's Avatar
11 May 2018 04:15
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Habasek wrote: GND I measured on a black pin in P11 (down), in the middle is 3.3V and there is no voltage on the yellow pin (top).
But PPM does not go to the second module either from the middle or from the top pin.


You need select PPM protocol for your model in order get PPM out.
  • Ilya
  • Ilya's Avatar
10 May 2018 19:07
Replied by Ilya on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Круть! Спасибо)
Thanx !
  • vlad_vy
  • vlad_vy's Avatar
10 May 2018 18:06
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

For example 1N4001 diodes.
  • Ilya
  • Ilya's Avatar
10 May 2018 17:28
Replied by Ilya on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Hi Vlad!
could you tell please what diodes you used to separate knob patentiometers from switches ??
sny specs?
thankyou .
  • Habasek
  • Habasek's Avatar
10 May 2018 16:24
Replied by Habasek on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

GND I measured on a black pin in P11 (down), in the middle is 3.3V and there is no voltage on the yellow pin (top).
But PPM does not go to the second module either from the middle or from the top pin.
  • vlad_vy
  • vlad_vy's Avatar
10 May 2018 10:19 - 14 May 2018 04:40
Replied by vlad_vy on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

Since iRangeX iRX-IR8M (t8sg-v5.x.x-2017-09-19) is somewhat different from Jumper T8SG I will place here the builds for iRangeX iRX-IR8M.

Previous changes:
* RUD and AIL reversed to comply with common direction for Deviation.
* AUX4 and AUX5 reversed to comply with common direction for Deviation.
* All switches reversed to comply with common direction for Deviation.
* batt_critical set to 3900 since iRX-IR8M can use 4xAA battery.
* LCD Internal Resistor Rate (Rb/Ra) set to 4 (0x24).
* Add support for 6 independent trims set.
* Add protocol for Corona V1/V2 and Flydream V3, from hexfet
* Support 16 channels for FrskyX and 14 for AFHDS-2A, from hexfet
* Fix Corona protocol, from hexfet
* More reliable and beep only once "beep" mux

Changes:
* More reliable and sound only once "voice" mux

(2018-05-10)
iRangeX iRX-IR8M based on Nightly Builds:

File deleted, see below...
  • vlad_vy
  • vlad_vy's Avatar
10 May 2018 03:49 - 10 May 2018 03:51
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

I don't know. I havn't IR8M.

I think P11 central pin is GND and outer pins are PPM in and PPM out.
Displaying 181 - 200 out of 496 results.
  1. Forum
  3. Search
Time to create page: 0.838 seconds
Powered by Kunena Forum
Force desktop display