Advanced Search

Search Results (Searched for: irx-ir8m)

  • nille
  • nille's Avatar
28 Jan 2018 23:00
Replied by nille on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Hello,

I can`t bind the the XK K110. Have anybody a solution?

I bound the TX with a nano QX FPV and with a blade 130.
the lost the signal after 2m.

I was trying DSM2 and also DSMX, 100 and 150mW. It was the same result.
  • SeByDocKy
  • SeByDocKy's Avatar
28 Jan 2018 12:22
Replied by SeByDocKy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Well I bound a FrSky XM+ (D16) with the IR8M and I had to tune the freq-tune to 66
  • antennenfreund
  • antennenfreund's Avatar
28 Jan 2018 11:30 - 28 Jan 2018 11:31
Replied by antennenfreund on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

SeByDocKy wrote: Did you select 100mW ?



No, I also fly to 150 mw, like my friend. He also has this remote condition I have the R-xsr receiver in it .. He has the Flysky i6b.

He has no ranges problems .. I do. :(

I did that too!

  • vlad_vy
  • vlad_vy's Avatar
28 Jan 2018 06:53 - 06 Feb 2018 14:44
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Can the toggle switch and rotary knob be made into separate functions ?


Yes, with some soldering work. You will need two diodes for that mod. The shoulder switches will be "H" switch and "G" switch.

First, disconnect shoulder switches from mainboard.
Next, we need two diodes connected: anodes to C.6 and catodes (black or white strip) to SWH1 and SWG1. And, SWH switch center pin connected to B.6 and SWG switch center pin connected to B.8.

SWH = C.6 ●--►|--●--○ \--● B.6
SWG = C.6 ●--►|--●--○ \--● B.8

Soldering points:
C.6 -> right horizontal trim positive direction contact = S8 (or throttle trim (left vertical trim) positive direction contact)
B.6 -> SWC switch center pin
B.8 -> SWB switch center pin

hardware.ini change:
;switch_types: 3x4, 3x3, 3x2, 3x1, 2x8, 2x7, 2x6, 2x5, 2x4, 2x3, 2x2, 2x1, potx2, potx1
;May occur more than once if necessary.
;Add nostock if stock FMOD and HOLD switches have been removed.
  extra-switches = nostock
  extra-switches = 3x4
  extra-switches = 2x2
  extra-switches = potx2
;

================================================
sw.name__bus(MCU pin # )___diode__switch__bus(MCU pin # )
================================================
SW "H" = PC.6 (MCU pin 37) ●--►|--●--○ \--● PB.6 (MCU pin 58)
SW "G" = PC.6 (MCU pin 37) ●--►|--●--○ \--● PB.8 (MCU pin 61)
  • Stefan_UK
  • Stefan_UK's Avatar
28 Jan 2018 02:43
Replied by Stefan_UK on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

Thank you very much, I updated my iRangeX iRX-IRM8 without any issues. I did have to recalibrate my sticks but I guess this is to be expected. The gimbals aren't very good on this TX.
  • Fernandez
  • Fernandez's Avatar
27 Jan 2018 21:04
Replied by Fernandez on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Or tune the center freq in prot options. It is known that especially AFHDS2a there are many cheap receivers out there with X-Tal off center reducing range a lot. (or not bind at all)
  • SeByDocKy
  • SeByDocKy's Avatar
27 Jan 2018 19:00
Replied by SeByDocKy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Did you select 100mW ?
  • antennenfreund
  • antennenfreund's Avatar
27 Jan 2018 18:52 - 27 Jan 2018 18:53
Replied by antennenfreund on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions



:(


The range is VERY VERY BAD with me!

Fuck!
  • SeByDocKy
  • SeByDocKy's Avatar
26 Jan 2018 17:32
Replied by SeByDocKy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Theta2 wrote: I've got my one today from banggood and i'm really disappointed, because of a missing button.

When i checked out all of the buttons i missed the click-sound when i pushed down the button S12 (trim backwards).

I've decided to open the radio and i was really really disappointed about what i found, see the attachment.

The second thing is, also attached, that the wheels on top have a totally different zero point. I can fix this, but the button is still missing afterwards.

I'm asking myself, how can someone forget to solder a button on the circuit board. To they not have a quality assurance what will push each button at least one time?

And, the wheels are not the one displayed on all product pages? They show chrome wheels of stainless steel or chromatted wheels what i got are wheels of white steel. So they attract me with a higher quality than i will get. All in all this this makes me feeling like i got ripped off. Thats not a good way to create long term customer relations. It's far away from that.

Did someone else have the same problem with the irangex irx-ir8m? a missing s12 button on the board?


back luck for the missing DIP :( :( ... In the worst can can take one from the throttle ?

For the POT. you can take the allen key to re-install correctly the button ?
  • Theta2
  • Theta2's Avatar
26 Jan 2018 16:26
Replied by Theta2 on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

I've got my one today from banggood and i'm really disappointed, because of a missing button.

When i checked out all of the buttons i missed the click-sound when i pushed down the button S12 (trim backwards).

I've decided to open the radio and i was really really disappointed about what i found, see the attachment.

The second thing is, also attached, that the wheels on top have a totally different zero point. I can fix this, but the button is still missing afterwards.

I'm asking myself, how can someone forget to solder a button on the circuit board. To they not have a quality assurance what will push each button at least one time?

And, the wheels are not the one displayed on all product pages? They show chrome wheels of stainless steel or chromatted wheels what i got are wheels of white steel. So they attract me with a higher quality than i will get. All in all this this makes me feeling like i got ripped off. Thats not a good way to create long term customer relations. It's far away from that.

Did someone else have the same problem with the irangex irx-ir8m? a missing s12 button on the board?
  • SeByDocKy
  • SeByDocKy's Avatar
26 Jan 2018 11:26
Replied by SeByDocKy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

My full video




with the flashing procedure... with the Vladvy build....
  • vlad_vy
  • vlad_vy's Avatar
26 Jan 2018 11:04
Replied by vlad_vy on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

Just for sure I replaced IR8M build with fresh "24" version - 2018-01-26.
  • vlad_vy
  • vlad_vy's Avatar
26 Jan 2018 11:01
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

I replaced IR8M build at Builds section with fresh 2018-01-26.
  • vlad_vy
  • vlad_vy's Avatar
26 Jan 2018 10:50 - 26 Jan 2018 10:59
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Just for sure I rebuild IR8M, try flash this build:

File deleted...
  • vlad_vy
  • vlad_vy's Avatar
26 Jan 2018 10:34
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

I don't understand what is the problem? Before update and after update.
  • SeByDocKy
  • SeByDocKy's Avatar
26 Jan 2018 07:43
Replied by SeByDocKy on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

vlad_vy wrote: You have a problems? It should be "24" version, but built 2018-01-25.


Ha no :) sorry I was confused with the date no problem so :)
  • vlad_vy
  • vlad_vy's Avatar
26 Jan 2018 07:40
Replied by vlad_vy on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

You have a problems? It should be "24" version, but built 2018-01-25.
  • SeByDocKy
  • SeByDocKy's Avatar
26 Jan 2018 07:33
Replied by SeByDocKy on topic iRangeX iRX-IR8M builds

iRangeX iRX-IR8M builds no more?!

Category: Builds

You attached the x25.zip file note the x24 ?
  • SeByDocKy
  • SeByDocKy's Avatar
26 Jan 2018 07:31
Replied by SeByDocKy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

betoinbeta wrote: Transmitter powering up problem

If I turn off the transmitter I can’t turn it back on.

I tried unplugging the AA battery module and it often times still doesn’t power up.

At first I thought I had a bad batch of batteries but it still does it even with a fresh batch.

Sometimes waiting for more than few minutes does power it back up.

Does anyone else have this issue and possible fix?



Yes the same for me .... :( :(
  • antennenfreund
  • antennenfreund's Avatar
26 Jan 2018 06:58
Replied by antennenfreund on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Is Freq-Fine 40-41????
Displaying 421 - 440 out of 496 results.
Time to create page: 0.856 seconds
Powered by Kunena Forum