;Only useful for transmitters with an after-market vibration motor ;enable-haptic=1 ; ;switch_types: 3x4, 3x3, 3x2, 3x1, 2x8, 2x7, 2x6, 2x5, 2x4, 2x3, 2x2, 2x1, potx2, potx1 ;May occur more than once if necessary. ;Add nostock if stock FMOD and HOLD switches have been removed. extra-switches = nostock extra-switches = 3x4 extra-switches = 2x2 extra-switches = potx2 ; ;Audio player connected to UART (Devo12/S internally, others via trainer port): audiofx, dfplayer ;voice= ; ;Enable if audio device is wired to uart5 instead of ppm on devo7e-256 ;voice-uart5=1 ; ;button_types: trim-all, trim-(left|right)-(up|down|both) ;May occur more than once if necessary. ;extra-buttons= ; [modules] ; there is no need to enable the cyrf6936 module unless ; it is wired to an alternate port. It is Enabled automatically otherwise ; enable-cyrf6936 = B12 ; has_pa-cyrf6936 = 1 enable-a7105 = A13 has_pa-a7105 = 1 enable-cc2500 = A14 has_pa-cc2500 = 1 enable-nrf24l01 = A15 has_pa-nrf24l01 = 1 ; enable-multimod = A13