name=DJI Naza mixermode=Advanced icon=NAZA.BMP [radio] protocol=DSM2 num_channels=7 fixed_id=123456 tx_power=150mW [protocol_opts] Telemetry=Off [channel1] template=simple [mixer] src=AIL dest=Ch1 curvetype=expo points=0,0 [channel2] template=simple [mixer] src=ELE dest=Ch2 curvetype=expo points=0,0 [channel3] safetysw=!RUD DR0 safetyval=-110 min=-151 template=simple [mixer] src=THR dest=Ch3 curvetype=expo points=0,0 [channel4] template=simple [mixer] src=RUD dest=Ch4 curvetype=expo points=0,0 [channel5] template=simple [mixer] src=AUX4 dest=Ch5 curvetype=expo points=0,0 [channel6] template=expo_dr [mixer] src=MIX0 dest=Ch6 scalar=95 curvetype=absval points=0 [mixer] src=MIX0 dest=Ch6 switch=MIX1 scalar=5 curvetype=absval points=0 [mixer] src=MIX0 dest=Ch6 switch=MIX2 scalar=-80 curvetype=absval points=0 [channel7] template=complex [mixer] src=FMODE0 dest=Ch7 scalar=78 curvetype=absval points=0 [mixer] src=FMODE0 dest=Ch7 switch=FMODE1 scalar=0 curvetype=absval points=0 [mixer] src=FMODE0 dest=Ch7 switch=FMODE2 scalar=-79 curvetype=absval points=0 [mixer] src=AIL DR1 dest=Ch7 switch=AIL DR1 scalar=40 usetrim=0 curvetype=expo points=0,0 [trim1] src=LEFT_V pos=TRIMLV+ neg=TRIMLV- [trim2] src=RIGHT_V pos=TRIMRV+ neg=TRIMRV- [trim3] src=LEFT_H pos=TRIMLH+ neg=TRIMLH- [trim4] src=RIGHT_H pos=TRIMRH+ neg=TRIMRH- [timer1] type=countdown src=Ch3 time=480 [gui-128x64] V-trim=59,10,1 H-trim=5,59,3 V-trim=65,10,2 H-trim=74,59,4 Small-box=2,22,Ch3 Small-box=2,31,Timer1 Small-box=2,39,Timer2 Model=75,20 quickpage1=Telemetry monitor