===== Version 5.0.0 =====
Version 5.0.0 was released on 2016-04-30

**IMPORTANT:**\\
**You must install the filesystem along with the new firmware.  Make sure to save your models first!**\\
**The configuration of hardware mods has changed since the previous 4.0.1 version. Instead of the tx.ini, they are in a new hardware.ini file, just like they were in the last nightly builds.**

==== Installation ====
  * Follow the instructions in the [[ https://www.deviationtx.com/user-manual | User Manual ]] that applies to your transmitter

==== Critical bug fixes ====
  * DSM2/DSMX fixes for lost binding during operation

==== Major Features ====
  * Allow reordering mixers on Devo7e/10
  * Reworked telemetry to have different displays for different protocols
  * Add Range Test capability
  * Support permanent timers
  * 
==== Minor Features / Bug Fixes ====
  * Support hardware modification to add extra switches to the devo7e
  * Support hardware modification to add vibration for Devo6/8
  * Add support for multi-module
  * Automatically reorder channels when changing protocols
  * Support smaller fonts in Devo7e
  * Improve volume control
  * Fix telemetry alarms
  * Fix power output contol for CC2500 protocols
  * Fix date displays
  * Support 4 alarm sounds for timers
  * Improve scrolling on many of the GUI screens
  * Support viewing virtual channels on Channel-test page
  * Telemetry alarms are more prominent
  * Properly display PPMIN on main page
  * Add debug log display option
  * Support newer Devo12S (with Rev2 Epson LCD driver)
  * Fix channel mapping when loading templates
  * Remove hardcoded fonts to improve theme-ability
  * Protocol fixes
      * YD717 - Fix channels for rudder, aileron, elevator
      * YD717 - Use random channels to allow multiple vehicles to fly in the same area
      * YD717 - Enable high-rate mode
      * YD717 - Support receiver throttle saftey
      * YD717 - Don't hang the transmitter waiting for a response from the model
      * Properly handle Tx mode in Hubsan protocol
      * DSM2/X - telemetry display fixes.  Support temperature display
      * DSM2/X - support extended telemetry info
      * DSM2/X - fix GPS heading units
      * DSM2/X - RSSI in dBM
      * WK* - Show dialog until biding is complete
      * USBHID - Support up to 12 channels
      * V202 - Support bind on power-up
      * PPMOUT - Allow more than 10 channels
      * V202 - Add 250kbps mode, headless, and calibration
      * HiSky - Support 3/6 axis option
      * Devo - Fix loss of signal issue with telemetry enabled
      * Flysky - Update packet period to increase compatibilty with more receivers

==== New protocols ====
      * SymaX
      * Frsky 2-way and V8 protocols
      * YD717 now supports Sky Walker 1306
      * YD717 supports XinXun
      * Crazyflie 'CFlie' protocol
      * H377 protocol
      * HM380 protocol
      * KN (V977) protocol
      * ESky150 protocol
      * Bluefly HP100
      * Flysky supports WLToys V6x6, v919, v913 v915
      * CX10 protocol
      * CG023 protocol - supports EAchine CG023 / 3D X4 / Attop YD-829(C) 
      * Joysway protocol
      * Hontai protocol
      * MT99 protocol - Supports Eachine H7
      * FY326 protocol
      * Bayang protocol - Supports H8 model and others
      * MJXq protocol
      * H8_3d protocol
      * Futaba S-FHSS protocol