User Tools

Site Tools


Joomla says you aren't logged in
rf_module_installation

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
rf_module_installation [2016/03/29 10:07]
FDR typo
rf_module_installation [2017/01/23 00:30] (current)
FDR link
Line 1: Line 1:
 ====== Adding External Modules to Your Deviation Transmitter ====== ====== Adding External Modules to Your Deviation Transmitter ======
 +\\
 ===== Introduction ===== ===== Introduction =====
 The Deviation firmware implements several protocols that the Devo series radios do not have the necessary hardware to support. To enable these protocols, it is necessary to install additional 2.4GHz transceiver modules. The following modules are supported: The Deviation firmware implements several protocols that the Devo series radios do not have the necessary hardware to support. To enable these protocols, it is necessary to install additional 2.4GHz transceiver modules. The following modules are supported:
 //Note: Be very careful when purchasing modules from Aliexpress or Ebay. The vendors love to use search-optimized titles which will often list multiple chip names in the title despite only supporting one of the listed chips.// //Note: Be very careful when purchasing modules from Aliexpress or Ebay. The vendors love to use search-optimized titles which will often list multiple chip names in the title despite only supporting one of the listed chips.//
 ==== Modules ==== ==== Modules ====
-The following modules are supported by Deviation. //A7105 CC2500 NRF24L01 CYRF6936// +The following modules are supported by Deviation: [[modulelist:​a7105|A7105]], [[modulelist:​cc2500|CC2500]], [[modulelist:​nrf24l01|NRF24L01]], [[modulelist:​cyrf6936|CYRF6936]]. 
-Each can control a different set of modules/​receivers. A (mostly complete) list of models and the corresponding modules can be found in the [[https://​docs.google.com/​spreadsheet/​ccc?​key=0Any72n5Y9u-kdGFDeXhBY0I0ek1raTdEN21VTlBzTkE&​usp=sharing|Supported Models]] list. More information on each module as well as hints on where to obtain them can be found on the [[ModuleList]] page. Information how to build a "​universal module"​ can be found here [[Building the Multi-Module]].+Each can control a different set of modules/​receivers. A (mostly complete) list of models and the corresponding modules can be found in the [[supported_models|Supported Models]] list. More information on each module as well as hints on where to obtain them can be found on the [[ModuleList]] page. Information how to build a "​universal module"​ can be found here [[Building the Multi-Module]].
 ===== Module Installation ===== ===== Module Installation =====
 //NOTE: Read through this entire manual before starting work. Make sure you understand what is needed and how to do it. Also, this procedure will void the warranty of your Devo transmitter in the process of implementing this modification.//​ //NOTE: Read through this entire manual before starting work. Make sure you understand what is needed and how to do it. Also, this procedure will void the warranty of your Devo transmitter in the process of implementing this modification.//​
 ==== Necessary Tools ==== ==== Necessary Tools ====
  
-  * Transceiver module (A7105, CC2500, NRF24L01, CYRF6936, or '​Universal Module'​+  * Transceiver module (A7105, CC2500, NRF24L01, CYRF6936, or '​Universal Module'​)
   * Small Phillips-head screwdriver   * Small Phillips-head screwdriver
   * Solder-sucker or solder wick (strongly recommended)   * Solder-sucker or solder wick (strongly recommended)
Line 23: Line 24:
  
 The following pages detail instructions for installing into various Devo transmitters:​ The following pages detail instructions for installing into various Devo transmitters:​
-  * Devo8 (and Devo6, Devo10, Devo12): [[Devo8ModuleInstall]] +  * [[rf_module_installation:​Devo8|Devo8 (and Devo6, Devo10, Devo12)]] 
-  * Devo7e: ​[[Devo7eModuleInstall]]+  * [[rf_module_installation:​Devo7e|Devo7e]]
 ===== Enabling modules ===== ===== Enabling modules =====
-After you have installed the module, you will need to enable them by editing a file on your transmitter. This is described in [[Enabling modules]].+After you have installed the module, you will need to enable them by editing a file on your transmitter. This is described in [[rf_module_installation:​enabling_modules|Enabling modules]].
rf_module_installation.1459271239.txt.gz (213619 views) · Last modified: 2016/03/29 10:07 by FDR