Advanced Search

Ok, so we've nothing to do for Mould King, it's just a DM007 clone and it's using the same protocol.

Here's a test firmware for Juancheng, select Green protocol, then there are 2 extra options in protocol options, P13 and P14, ranging from 0 to 7.
Try each values, check if it activates a feature, then report
www.dropbox.com/s/q4o3lpwi750uuv2/deviat...0.1-2cde795.zip?dl=0

Yes, i have try it, but work only with Mould King. I haven't camera on it, but headless mode is turn on with channel 9!

Juncheng don't work.

DM007 already has video (ch 8 ), snapshot (ch 7) and headless (ch 9) features implemented, have you tried them ?

Green or DM007

With blue protocol start to fly, and i had problem.
For headless mode i have to put two stick on extern down, i don't know if is possible set a function and activate in on fly!

Oh, and I need to know something, do they bind with the green or blue CX10 protocol ?

Devo 7e ^___^
Thanks!

I can also try to build a test firmware with some protocol options that set some unknown bits... maybe we can find those features this way ...
Give me a few moments

Which radio do you have ? Devo 10 ? 7e ?

For the analyzer, you can have a look on ebay, search for 8 channel logic analyzer.

Perfect! Probably i buy it www.banggood.com/USB-24M-8CH-24MHz-8Chan...-1_1_30-p-74101.html
but is out of stock on Banggood.


I found this www.amazon.co.uk/Hobby-Components-24MHz-...id=1444298228&sr=1-4

You can advice better price?

Get a logic analyzer, that would be simpler and probably cost less than shipping your TX to me
Sebydocky wrote a guide: www.deviationtx.com/forum/protocol-devel...95-spi-capture-guide , but if it's not clear you can take pictures of the inside of your TX then we'll tell you where to solder the probes.

If you could serve would be willing to send one of the remote controls! Or as I suggested good Durete could buy a cheap logic analyzer and start to learn to capture data...
But I would not know where to start. : P

We need stock TX spi bus dumps to implement those features... shouldn't be hard to add them then

Hello everyone, lately I'm using three models quadcopters, that bind to the protocol Cx10, are the Juncheng 3015-1/ 3015-2 and Mould King 33041.
the controls are to be reversed, but once we settled everything with the mixer running. My big problem is that each one of the missing two functions. Which are those of camera and camcorder. O LED lighting and double flip in the case of the model 3015-2. Some of you can help me. Also since taking both sticks in the bottom outwards turns on / off function without head, you can activate it only with a switch or button? Thank you.
www.rcgroups.com/forums/showthread.php?t=2467699
www.rcgroups.com/forums/showthread.php?t=2404783

I have the same behavior.
Can't manage to have high rate with CX10.
Not as fast as with stock TX in expert mode.

Thank to you I recently use my devo 7e with my cx-10a (blue board), I'd like to know if it's normal that even with scalar=125 the rates is almost the same as the max level with the standard tx. I hoped for a little more punch for this model, is it possible or is that the max I could get?

Thank You!!!

Actually I was a little liberal and the new code sends the DM007 control bits for the Green and Blue-A modes also. From the reports of success it seems they don't interfere, but I'll clean that up before a pull request Still would like to hear from a DM007 owner.

So it seems the CX-10C doesn't respond to the DM007 camera controls. We'd need a capture.

Just tested on my Q282J and it's working perfectly
I tested also the blue-A option on the CX-10C .. working well but no camera triggering ...
I guess we need SPI data to add these specific flg ?

I have the Floureon FX-10, which is allegedly identical, and I initially had a lot of trouble binding mine (using the CX-10 protocol, blue-A). Now I switch on the quadcopter first, and wait several seconds before turning on the transmitter, and it seems to bind quite reliably this way, I don't know why. I'm not using fixed ID.

It seems like good practice to me to turn on the transmitter first, but that hasn't worked for me with this quad.

Hey all,

I just picked up a DHD D1 Drone. It is suppose to bind with the CX10 protocol, but I tried green, blue-a, and DM007 with no avail.

I opened up the rX, and it has a xn297 v1.0 printed on it. It also has CX-10 START on the controller board. It seems it should bind but its not.

Any idea? Do I need a specific fixed id or something?

I think you should create a new expandable opensource protocol with sample codes, and send it to all manufacturers to use it free.
This way you would need less reverse engineering resources...

it is ... I hope this "new" protocol doesn't require auto ack or something like that ...