Advanced Search

it's correct?
www.deviationtx.com/forum/model-configs/...ncheng-3015-1-3015-2

Thanks for reporting, please post your .ini in the appropriate sub-forum once you're happy with them
www.deviationtx.com/forum/model-configs

Hahahahahah .... EVERYTHING WORKS !!! I had done the first tests without a memory card inserted and the poor continued to flash to tell me I was missing! I always thought it would record. Now everything works. basically a channel makes the photo and the other records. I assigned commands. Ch7 run the photo, CH8 starts recording. So I assigned channels to SWA0 and SWA2 and I still SWB free! : D NICE and THANK YOU!

IKKI wrote: Recording starts immediately and have no way to stop it.

Can you re-check with yesterday's test firmware to confirm video is on packet[14] bit 4 for JC3015-1 ?

I installed and successfully solved the problems mentioned before yaw. But now I have problems configuring it. Recording starts immediately and have no way to stop it. The commands are correct.

I have "Bad/missing protocol modules!" message on this build....

UPD: Sorry, retried dl with walkera tools - now it's ok. The problem was with DeviationUpload-0.8.0.jar.

none of you have noticed a lack of yaw left only with the Deviationtx? Why strangely if I connect it to the original transmitter is not suffering from any defect. But with the protocol CX10 every time I try to reconnect the quad without turning it off this increases the steady yaw to the left.


Now i try this version! Thank you!

Here's a test version for Devo 7e:
www.dropbox.com/s/bj3ey2q0loy1t7k/deviat...0.1-ddc8b89.zip?dl=0

Source code:
bitbucket.org/goebish/deviationtx/branch/protocol_q282#diff

It has CX10 Green, Blue-A, WLToys Q282 (thanks hexfet), DM007, JC3015-1, JC3015-2 and MK33041 format options.

Channel 5 controls rate (except on Q282: controls lights)
Channel 6 controls flips (double flips if >50 on JC3015-2)
Channel 7 controls picture snapshot (except on JC3015-1: controls lights)
Channel 8 controls video recording (requires toggle to start/stop on some models)
Channel 9 controls headless
Channel 10 controls RTH

Please report, could be cool to re-check CX10 and DM007 to make sure I didn't break anything.

^____________^ I'm happy!!!

https://youtu.be/x69Xx0PHLaU

even if the price is low as the quality, to know how to use not just be thrown away! : D

I missed that, I was editing my post

Only 3015-2 has light control.

goebish wrote:

Durete wrote: IMO right choice, to keep the standard channel map

Yup, but I'll have to make an exception for leds on Juncheng 3015-2 because channel 5 is already used for "rate".

Yep, the "standard map" is light control.

@IKKI
Doesn't have light control the 3015-1/2 ?
Yup, I missed the light control on 3015-2

Ok.

... what a mess

goebish wrote: - Mould King 33041: which channels are reversed compared to the "Green" protocol, Aileron and Elevator ?

No. They both are reversed on DM007 option. On Green option only ELE is reversed.

Durete wrote: IMO right choice, to keep the standard channel map

Yup, but I'll have to make an exception for leds on Juncheng 3015-2 because channel 5 is already used for "rate".

goebish wrote: Ok, I'll use a single channel (6) for flips on Juncheng 3015-2:

<= 0 -> no flip
< 50 -> single flip
> 50 -> double flip

IMO right choice, to keep the standard channel map

Ok, I'll use a single channel (6) for flips on Juncheng 3015-2:

<= 0 -> no flip
< 50 -> single flip
> 50 -> double flip

yes, channel 5 and 6 is flip and rate for juancheng, now i have to chek the reversed channel becouse i don't use a virgin ini...



edit: ok, AIL and ELE inverted on CX10 green standard protocol

I'm implementing the 3 new models and I still have a few questions:

- Juncheng 3015-2: we found the flag for "double flip", but does it still have "single flip" too ?
- Mould King 33041: which channels are reversed compared to the "Green" protocol, Aileron and Elevator ?

sledgehammer1570 wrote:

IKKI wrote: analizer... www.ebay.com/sch/i.html?_from=R40&_sacat...rksid=p2045573.m1684
or In this case.... Order another one, maybe 3015-1

Here's my procedure: (i'm new to deviation)

I have Devo 7e with nrf24l01 module. Binds at least with bayang and v202 -> Cleaned the disk/drive of the devo before updating to goebish's dfu. -> Import the latest nightly build and then import the protocol folder from goebish's .zip and replace all -> in hardware.ini " enable-nrf24l01 = A13 " -> In deviation, swich to multi and browse for the cx-10 protocol, green option. -> hit re-init -> nothing happens with 3015-2..

Something go wrong? I wouldn't bother ordering another 3015-2. I could imagine getting that analyzer. I assume there is some topic where I could learn how to use that?

The procedure seems the right one. The only thing I can report is that my bind after the third beep. It takes a few seconds. You have no way of making further verification protocol with other radio control toy? I'm reading here to learn to acquire.
www.deviationtx.com/forum/protocol-devel...guide?start=20#38618