Contents

• 1. Overview
  • 1.1. Disclaimer
  • 1.2. Notices
  • 1.3. Legal status and copyright
• 2. Installation
  • 2.1. Preparation
    • 2.1.1. Windows Driver Installation
  • 2.2. DFU Installation With Walkera DfuSe
  • 2.3. Upgrading the file system via USB
  • 2.4. DFU Installation with Deviation Uploader
  • 2.5. Upgrading the file system with Deviation Uploader
  • 2.6. Deviation 5.0
  • 2.7. Nightly Deviation Builds
  • 2.8. Test Builds
  • 2.9. USB & File-system
• 3. Reporting Bugs
• 4. A Note About this Manual
• 5. Main Page
  • 5.1. Safety System
• 6. Navigating
  • 6.1. Navigating
• 7. Main Menu
  • 7.1. Model menu
  • 7.2. Transmitter menu
  • 7.3. USB
  • 7.4. About Deviation
• 8. Transmitter Menu
  • 8.1. Transmitter config
    • 8.1.1. Generic settings
    • 8.1.2. Buzzer settings
    • 8.1.3. LCD settings
    • 8.1.4. Timer settings
    • 8.1.5. Telemetry settings
  • 8.2. Channel monitor
  • 8.3. Input Monitor
  • 8.4. Telemetry monitor
  • 8.5. Range Test
• 9. Model menu
  • 9.1. Model setup (Std & Adv GUI)
    • 9.1.1. Predefined Model Templates
  • 9.2. Mixer (Adv GUI)
    • 9.2.1. Channel Reorder
    • 9.2.2. Channel configuration
    • 9.2.3. Virtual channel configuration
    • 9.2.4. Simple Mix Type
    • 9.2.5. Expo & Dual-Rate Mix Type
    • 9.2.6. Complex Mix Type
    • 9.2.7. Cyclic
    • 9.2.8. Reordering Mixers
    • 9.2.9. Available Curves
    • 9.2.10. Curve Editing
  • 9.3. Timers (Std & Adv GUI)
  • 9.4. Telemetry config (Std & Adv GUI)
  • 9.5. Trims and Virtual Inputs (Std & Adv GUI)
  • 9.6. Datalog (Std & Adv GUI)
  • 9.7. Main page config (Std & Adv GUI)
    • 9.7.1. Configuring object position
    • 9.7.2. Creating Objects
    • 9.7.3. Loading Objects
    • 9.7.4. Configuring Objects
    • 9.7.5. Choosing toggle icons
  • 9.8. Standard GUI Menu items
    • 9.8.1. Servo Reverse
    • 9.8.2. Dual-Rate/Expo setting
    • 9.8.3. Sub-trim Adjustment
    • 9.8.4. Servo Travel Adjust
    • 9.8.5. Swash Configuration
    • 9.8.6. Throttle Curve
    • 9.8.7. Pitch Curve
    • 9.8.8. Gyro Sensitivity
    • 9.8.9. Switch Assignment
    • 9.8.10. Throttle Hold
    • 9.8.11. Fail-Safe Configuration
• 10. Protocols
  • 10.1. Protocol: DEVO
  • 10.2. Protocol: WK2801
  • 10.3. Protocol: WK2601
  • 10.4. Protocol: WK2401
  • 10.5. Protocol: DSM2
  • 10.6. Protocol: DSMX
  • 10.7. Protocol: J6Pro
  • 10.8. Protocol: WFLY
  • 10.9. Protocol: *Flysky
  • 10.10. Protocol: *AFHDS-2A
  • 10.11. Protocol: *Hubsan4
  • 10.12. Protocol: *Joysway
  • 10.13. Protocol: *Bugs3
  • 10.14. Protocol: *Frsky-V8
  • 10.15. Protocol: *Frsky
  • 10.16. Protocol: *FrskyX
  • 10.17. Frsky and FrskyX Extended Telemetry
  • 10.18. Protocol: *Skyartec
  • 10.19. Protocol: *Futaba S-FHSS
  • 10.20. Protocol: *Corona
  • 10.21. Protocol: *Hitec
  • 10.22. Protocol: *V202
  • 10.23. Protocol: *SLT
  • 10.24. Protocol: *HiSky
  • 10.25. Protocol: *YD717
  • 10.26. Protocol: *SymaX
  • 10.27. Protocol: *Hontai
  • 10.28. Protocol: *Bayang
  • 10.29. Protocol: *FY326
  • 10.30. Protocol: *CFlie
  • 10.31. Protocol: *H377
  • 10.32. Protocol: *HM830
  • 10.33. Protocol: *KN
  • 10.34. Protocol: *ESky150
  • 10.35. Protocol: *Esky
  • 10.36. Protocol: *BlueFly
  • 10.37. Protocol: *CX10
  • 10.38. Protocol: *CG023
  • 10.39. Protocol: *H8_3D
  • 10.40. Protocol: *MJXq
  • 10.41. Protocol: *Bugs3Mini
  • 10.42. Protocol: *E012
  • 10.43. Protocol: *E015
  • 10.44. Protocol: *NCC1701
  • 10.45. Protocol: *V911S
  • 10.46. Protocol: *GD00X
  • 10.47. Protocol: *LOLI
  • 10.48. Protocol: *E016H
  • 10.49. Protocol: PPM
  • 10.50. Protocol: USBHID
  • 10.51. Protocol: SBUS
  • 10.52. Protocol: CRSF (Crossfire)
  • 10.53. Protocol: PXX
• 11. Advanced Topics
  • 11.1. Setting up a Buddy-Box
    • 11.1.1. Master Mode
    • 11.1.2. Slave Mode
  • 11.2. Setting Up FPV or Other External Inputs
  • 11.3. Using a Trim as a Virtual Switch
  • 11.4. Swash Mixing
  • 11.5. Modifying sounds
• 12. Emulator