- Posts: 5
Jumper T8SG V2 won't stay on.
- muzzlitebeer
-
Topic Author
- Offline
Less
More
22 Jun 2020 11:28 - 22 Jun 2020 11:59 #76509
by muzzlitebeer
Jumper T8SG V2 won't stay on. was created by muzzlitebeer
I press the on button and the transmitter comes to life. I get the 'Deviation' flash screen on the LCD, but as soon as I take my finger off the button, it shuts down.
Earlier this evening, I noticed that only the left/red LED was on, the right/green LED wasn't glowing.
I don't think it is the 18650 batteries. I just put them on a balance charge and they show 7.6 volts.
Earlier this evening, I noticed that only the left/red LED was on, the right/green LED wasn't glowing.
I don't think it is the 18650 batteries. I just put them on a balance charge and they show 7.6 volts.
Last edit: 22 Jun 2020 11:59 by muzzlitebeer. Reason: I don't know why, but it posted itself when I'd only written one and a half sentences. I hadn't finished... 2nd edit, clarified which model I have.
Please Log in or Create an account to join the conversation.
- Mack775
-
- Offline
Less
More
- Posts: 42
22 Jun 2020 18:56 #76511
by Mack775
Replied by Mack775 on topic Jumper T8SG V2 won't stay on.
7.6 should be 8 and a little more 8.1,8.2 ot so. Do not have a Jumper but use several 18650.
Please Log in or Create an account to join the conversation.
- muzzlitebeer
-
Topic Author
- Offline
Less
More
- Posts: 5
30 Jun 2020 08:30 #76541
by muzzlitebeer
Replied by muzzlitebeer on topic Jumper T8SG V2 won't stay on.
Seems to be working ok now...
![:huh: :huh:](/media/kunena/emoticons/wassat.png)
Please Log in or Create an account to join the conversation.
Time to create page: 0.029 seconds
-
Home
-
Forum
-
General
-
General Discussions
- Jumper T8SG V2 won't stay on.