Tx_template.ini for devo10

Start
Prev
1
Next
End

suvsuv
Topic Author
Offline

31 Oct 2012 15:49 #2542 by suvsuv

Tx_template.ini for devo10 was created by suvsuv

The tx_template.ini stores TX configure such as calibration data. However, devo10 has 6 calibration sticks (elev, aile, thro, rudd, aux4 and aux5), instead of 4. So I think a tx_templated_10.ini is needed for devo10

Please Log in or Create an account to join the conversation.

FDR
Offline

31 Oct 2012 16:05 - 31 Oct 2012 16:06 #2543 by FDR

Replied by FDR on topic Tx_template.ini for devo10

???

It is simply called "tx.ini", isn't it?

I think it would be perfectly fine, if it would contain plus two section (calibrate5 and calibrate6) and ignore the touch section for the DEVO 10...

EDIT: ...or you mean the source file, which is copied to the filesystem directory at compile time?

Last edit: 31 Oct 2012 16:06 by FDR.

Please Log in or Create an account to join the conversation.

suvsuv
Topic Author
Offline

31 Oct 2012 17:00 #2546 by suvsuv

Replied by suvsuv on topic Tx_template.ini for devo10

Yes, I mean the source file, which is copied to the filesystem directory at compile time.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

31 Oct 2012 18:12 #2548 by PhracturedBlue

Replied by PhracturedBlue on topic Tx_template.ini for devo10

for the moment, it is likely that they can be the same file. adding default calibration for the aux1 and aux2 to tx_template.ini should be ok. If we ever find a Tx that uses different resistors (or a different touch screen like the devo12) we'll need to split them at that time (unless it is actually causing you issues at the moment). Maybe store the file in target/<tx>/. I don't really want model-specific files in the root src dir.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.058 seconds

Force desktop display