Memory Mod. On F7

I have done the search for the memory modification and I know that this chip is good to go, SST25VF032B-80-4I-S2AF SOP-8
I figured I would have to reload deviation after I put it in.
Any pointers on the install

Maybe not to many people attempt to do the chip replacement, but a write up in the available mobifications section would be a huge help!

I installed my sst25vf chip today on my F7 now im stuck. If I turn on the tx I just get a blue screen and the only way to shut it off is to disconnect the battery. I can hold down ENT and power on to go into USB screen dimly lit , but I cant get the deviation uploader or the walkera dfu application to recognize my radio.
the computer recognizes it as the f drive and it has the fs file in it but I just can't get the deviation uploader tool to recognize my radio.

deviation was running fine and the radio was binding fine even the devo.fs was working good.
HELP

I just looked in the radios fs file and it reads all YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY with little dots above the Y like 2 pages long.

I screwed up the 2nd pad down on the right-hand side, anyone knows where it goes to on an F7

well my f7 is done for I tried to check the chip connections and it went from bad to worse.
2 of the The chip pads are toast and I give up. I could handle the module install but the chip got me!

f7 on ebay for parts!!!!!

Thanks for that information Vlad, There Is Hope!!!

Vlad you are my hero for the day!
I was able to trace out all of the connections and with the information you provided me I was able to get it to work

Here are some pictures of the F7 connections so you don't have to cross reference things from the f12.

And a picture of the Frankenstein memory mod I have ended up with.

Pics are to big for posting, I need to figure out resize.

Please Help Again!
At first after xms mod. I turned it on and the Devo F7 V5.0 screen came up but it only had a 1 line dispay ,and I thought everything was good it would shut right off with the switch and turn on with the switch, and it would go into USB mode when I turn it on with the ENT button down, but then...

I tried to reload my settings and stuff with the build fs tool in CMD and it seemed to go fine but now I only get a dim Deviation USB screen no matter how I turn it on.

I think all my chip connections are good or the first DEVO F7 V 5.0 screen would never come up, would it?

I just can't get the deviation uploader to recognize and show my radio is plugged in, the computer chimes and shows the fs file on the f:\ drive of the computer.... Frustrating after thinking I had it solved

I just can't get the deviation uploader to recognize and show my radio is plugged in, the computer chimes and shows the fs file on the f:\ drive of the computer.... Frustrating after thinking I had it solved
I tried driver installer 1.0 and 1.1 I tried deviation uploader 0.7 and 0.8 It wont show my radio , like i said the computer chimes and shows the f:\ drive connected just nothing linking to the deviation uploader , I tried on 2 different windows 10 computers now, so im stuck!
I double and triple checked all of the memory chip connections and they all link to the main chip with continuity on each pin that corresponds so i think thats good.
I will send this F7 to someone if they think they can get the F7 XMS on to it for me, I can pay for your time,

I forgot to mention that I also have tried to use the Walkera Defuse upgrade tool and it does the same thing, it just won't recognize the F7, I can't get it to connect.

I will send this F7 to someone if they think they can get the F7 XMS on to it for me, I can pay for your time,

You mess it up with driver installer, I done it to, but I managed to get it working again.
Run the driver installer again and select Walkera USB driver and restart the computer!

After this it should work.

OK I'm trying it right now

PM?

Nope I tried it on 2 computers and it won't work