Binding the Q333 with the T8SG V2

Has anybody successfully bound the WLTOYS Q333 using the Q303 protocol?

Is there any other settings I need to change to make this work as I am having no success yet. Thanks

There's a video on youtube explaing it.

Video doesnt go through the settings required. Getting there by trial and error. I have it bound now, but motors stop after about 30 seconds for no reason. Haven't test flown it yet as I don't want it crashing to the ground after 30 seconds.

Any suggestions? Any body else having issues?

Some altitude-hold equipped quadcopters will disarm shortly if the throttle stick is not in the middle position.

The Q333 is not altitude hold

I am guessing as I dont own one, that the Q303 is an altitude hold quad?

Q303 has options to enable or disable the altitude hold feature. I was just guessing the Q333 worked in a similar way but I don't own a Q333.

I am sorry this is out of topic.

I am trying to binding h502s and jumper t8sg plus, but no success.

I have read all page of "new hubsan column" and tried with selecting protocal Option (h107, 301, 501) and changing Freq tune"(-300~300) step by step.

I read your writing so I wonder if any progress was.
If any , please help me to bind these two
Tks vm.

doittom wrote: I am sorry this is out of topic.

I am trying to binding h502s and jumper t8sg plus, but no success.

I have read all page of "new hubsan column" and tried with selecting protocal Option (h107, 301, 501) and changing Freq tune"(-300~300) step by step.

I read your writing so I wonder if any progress was.
If any , please help me to bind these two
Tks vm.

The protocol for H502s has not yet been cracked. Experiment last year showed that it could bind to H301 protocol but it was not 100% compatible. I have then abandoned this quad and I got addicted to APM / Pixhawk since I am no longer satisfied with ready-to-fly quad's.
It will need Goebish to work further on the protocol but his to-do list always grows faster than what he can handle during his spare time.
Anyway flying H502s with T8SG will not fully utilize the features as this transmitter does not have built-in GPS and FPV module.

@ajtank

Thanks vm for your reply.