Just returned to the hobby after a few years break. Upgraded my Ultimate 7e to the latest build from Hexfet "deviation-devo7e-256-v5.0.0-408f8c0". Got the error message "Missing Modules: MultiMod" right after upgrade. Has the hardware.ini file format changed? I'm using the original multimodule by PB. Appreciate for any suggestions. Here is the modules section of hardware.ini file I'm using:
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
; has_pa-cyrf6936 = 0
enable-a7105 = S1
has_pa-a7105 = 1
enable-cc2500 = S3
has_pa-cc2500 = 1
enable-nrf24l01 = S402
has_pa-nrf24l01 = 1
enable-multimod = A13
[EDIT]
Installed the official nightly build on 2021-06-06 "deviation-devo7e-256-v5.0.0-c84450e", same problem. Tried the official release "deviation-devo7e-v5.0.0" and it works fine.
