WTF! HELP!

Hi!

Please help!

I connected my devo10 through USB to grab some models and then I turned off the devo.

When I turn it back on, I can only load the first model!! All other entries are blank in the "load" options.

If I reconnect the Tx to USB then I can see that the configs are still there but they don't show in the Model setup ->Load options (only #1 shows!)

Please help me recover my models!

thanks!
-=S=-

Hi FDR,

I just turned the devo off when I finished coping the files from the TX to the computer.

The files I copied are good, the files in the devo are also good, but when I go to model munu -> model setup -> load : only the first file shows and there are no other entries at all on the screen.

If I reconnect the devo, the files are still in there and can be opened and view by wordpad.


Cheers!
-=S=-

Hi Vlad,

Unfortunately the files are indeed .ini and windows identifies them as "configuration settings".


OH!

It turns out, that before I have 2 coffees and drop a deuce, i'm pretty retarded in the morning.

I had accidentally moved, rather than copy model2. When I replaced it we're back to normal!

Sorry for the false alarms, and thanks gents for the quick replies!

Have a good day!
-=S=-

Hmmm, I cant help but feel a tiny bit responsible scream.
But at least you have sorted it out.

LOL!

It's all good!