Swash mix question.

Hi,
I am using the model from this thread: www.deviationtx.com/forum/model-configs/...ybar-with-2801#13664
with my 450 Sport clone, I have changed the channel assignments to work with the DSM2 AR6100e Rx I have.
Pitch works fine - swash moving up and down nicely with all servos moving in correct direction.
Elevator works, rear servo moving with front servos moving a bit in opposite direction, tilting swash in correct direction.
Aileron is reversed, cyclic left is tilting swashplate to the right.

Using advanced mixer view, in CYC-AIL I am changing the Src to !AIL, but It is not reversing the swash tilt.
What am I doing wrong?

Hi,
Go to the Model Setup, Click on the <Heli> Model type, then change the AIL Inv to 'Inverted'.
Hope this help.

Thanks guys, fixed. This is one helpful forum!