Standard GUI Channel Name

Start
Prev
1
Next
End

sonicserve
Topic Author
Offline

11 Jan 2014 02:02 - 11 Jan 2014 09:03 #18346 by sonicserve

Standard GUI Channel Name was created by sonicserve

I am a newbie to Deviation with a DEVO7E. The Advanced GUI is too much for me now so I want to start with Standard GUI. But in the Reverse setup, I see:

1-AUX-4 <Normal>
2-AUX-3 <Normal>
3-AUX-2 <Normal>
4-AUX-1 <Normal>

instead of

1-ELE <Normal>
2-AIL <Normal>
3-THR <Normal>
4-RUD <Normal>

How to let it display the actual channel name instead of numeric names?
Thanks a lot.

Edit1: The deviation was configured with PPM protocol, binding to HT8 to fly HCP80

Last edit: 11 Jan 2014 09:03 by sonicserve.

FDR
Offline

11 Jan 2014 07:07 #18350 by FDR

Replied by FDR on topic Standard GUI Channel Name

What protocol do you use?

vlad_vy
Offline

11 Jan 2014 07:24 - 11 Jan 2014 07:25 #18351 by vlad_vy

Replied by vlad_vy on topic Standard GUI Channel Name

I think it's PPM and USBHID protocols.

Last edit: 11 Jan 2014 07:25 by vlad_vy.

sonicserve
Topic Author
Offline

11 Jan 2014 08:44 #18354 by sonicserve

Replied by sonicserve on topic Standard GUI Channel Name

I was using PPM protocol together with HT8 to fly HCP80

Start
Prev
1
Next
End

Time to create page: 0.186 seconds