Devo8s with Deviationtx v4.x fw bug

Start
Prev
1
Next
End

wk100
Topic Author
Offline

30 Mar 2014 04:16 #21949 by wk100

Devo8s with Deviationtx v4.x fw bug was created by wk100

it will not work with 120SWASH 3Servo. I have tested with Walkera RX2801Pro RX2806 and RX2607 receivers. No matter what I did, it will not move the swash correctly. Tried it with 2801 Pro TX, works perfectly. BIG LET DOWN ON THIS DEVIATIONTX FW VERSION!!!

sbstnp
Offline

30 Mar 2014 13:09 - 30 Mar 2014 13:10 #21954 by sbstnp

Replied by sbstnp on topic Devo8s with Deviationtx v4.x fw bug

Seriously? Show us, make a short clip and show us what's wrong or describe what the problem is, please.

More, using CAPITALS will not get any sympathy from me (at least).

Devo 10 + 4in1
~~Spektrum Dx9~~
FrSky Taranis + TBS Crossfire

Last edit: 30 Mar 2014 13:10 by sbstnp.

FDR
Offline

30 Mar 2014 13:47 - 30 Mar 2014 13:48 #21955 by FDR

Replied by FDR on topic Devo8s with Deviationtx v4.x fw bug

I bet you don't use the cyclic mixers.
Try to load the 6ch heli template as a starting point...

(I could wrote, that it is a big let down, that you didn't read the manual...

)

Last edit: 30 Mar 2014 13:48 by FDR.

Start
Prev
1
Next
End

Time to create page: 0.300 seconds