Devo 10 with Deviation behaves like a 4CH tx

Hi i was hoping i could get some help.
I flashed my Devo 10, White Edition, yesterday and when i was done I did a bind with a Walkera rx1002.
CH 1 to CH 4 work but the remaining 6 Channels do not transmit when the toggle swithes are used.
in the menu the Transmitter shows the toggle switches are moving between +100 and -100, but on the channel page it shows nothing gets transmitted, except for ch1 to 4.

Has anyone got any ideas as to what to do? I really want to change flight modes on my quad.

Thank you.

Thank you
I did try the mixing but I'm probably just doing it wrong.
Thanks for the response.

Wilcox wrote: Thank you
I did try the mixing but I'm probably just doing it wrong.
Thanks for the response.

Mixing is one of the few places where you actually have to go to the save "button" in the menu for it to remember what you configured. Gets me all the time XD. i assign something, leave the mixing menu for that channel, and then realise i forgot to save XD.

Thanks. I finally managed to sort it out. I was not saving the setup. Now figured it out. Thanks.