custom model Icons and Failsafe

Start
Prev
1
Next
End

Spyder22
Topic Author
Offline

20 Mar 2017 23:17 #60458 by Spyder22

custom model Icons and Failsafe was created by Spyder22

I just built a racing quad and I want to put a failsafe in case the tx gets disconnected, how would I go about doing this in deviation 5.0 on a devo 8s. I also want to use a custom icon for my quad, but im not sure how to make one.

Thanks

mwm
Offline

21 Mar 2017 07:07 #60469 by mwm

Replied by mwm on topic custom model Icons and Failsafe

How you set failsafe depends on the reciever, so you'll need to tell us which Rx you used.

Read the pines forum thread for the icing for format, then copy a file with the appropriate format to the modelico folder on the transmitter.

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Spyder22
Topic Author
Offline

21 Mar 2017 10:45 #60472 by Spyder22

Replied by Spyder22 on topic custom model Icons and Failsafe

Im flying a RX701 Devo Reciever

FDR
Offline

21 Mar 2017 11:09 #60473 by FDR

Replied by FDR on topic custom model Icons and Failsafe

Then simply set the required value(s) in the fail-safe field on the channel setup page(s)...

Spyder22
Topic Author
Offline

21 Mar 2017 11:12 #60474 by Spyder22

Replied by Spyder22 on topic custom model Icons and Failsafe

But where is that setup page in the advanced mixer gui? Thats what Im confused on, I can't find it.

FDR
Offline

21 Mar 2017 11:53 #60475 by FDR

Replied by FDR on topic custom model Icons and Failsafe

That is the button in the first column, on which the chanel name is written.

Spyder22
Topic Author
Offline

21 Mar 2017 12:17 #60476 by Spyder22

Replied by Spyder22 on topic custom model Icons and Failsafe

Found it, Thank You!

Start
Prev
1
Next
End

Time to create page: 0.310 seconds

Force desktop display