help with e010 with beecore f3 evo board, Devo 7e

Hi all newbie here,

i have just got a devo 7e and flashed to deviation 5.0.0 and i have a e010 with beecore f3 evo flashed with betaflight, its dsm2 too

i have a few questions i cannot seem to get the throttle any higher than 1870 where as my mate can get his to 2000, i have started a new model and its still the same...?



thanks
simon

Search the forums for betaflight. The rxrange command.

Model menu > Mixer > Thr channel > adjust scale+ with the throttle at full until you reach 2000.

Or you can do the rxrange through cli.

How do I do the rxrange? When I adjust the scale it doesn't go above 1870

If I put

Rxrange 3 1000 2000

Would that solve it?

Put in what you get from the transmitter, that is the only thing the fc should know.
Some more explanation.
www.droningon.co/2017/03/23/transmitter-...nt-mismatch-rxrange/