Walkera LadyBug V2

Start
Prev
1
Next
End

Torch
Topic Author
Offline

01 Jun 2014 00:05 #23798 by Torch

Walkera LadyBug V2 was created by Torch

Deviation v4 with Devo 7E LadyBird V2 only binds and stays in Flip mode (Green lights). How do I setup Flight Mode switch to enable and turn off Flip mode?

Please Log in or Create an account to join the conversation.

Bullfrog
Offline

01 Jun 2014 05:16 #23804 by Bullfrog

Replied by Bullfrog on topic Walkera LadyBug V2

3D Mode is switched by Ch7, assign a switch to Ch7 with values -34 / 66.

Example:

[channel7]
template=complex
[mixer]
src=Ch7
dest=Ch7
scalar=-34
curvetype=fixed
[mixer]
src=Ch7
dest=Ch7
switch=FMODE1
scalar=66
curvetype=fixed
[mixer]
src=Ch7
dest=Ch7
switch=FMODE2
scalar=66
curvetype=fixed

Please Log in or Create an account to join the conversation.

Torch
Topic Author
Offline

01 Jun 2014 21:57 #23833 by Torch

Replied by Torch on topic Walkera LadyBug V2

Thanks add this to model.ini using notepad ++ or tx config file? How do assign channel using standard or advance setup?

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

01 Jun 2014 22:17 #23834 by PhracturedBlue

Replied by PhracturedBlue on topic Walkera LadyBug V2

The easiest way is to add it with notepad++.

But if you want to do it in the Tx, you would go to the Ch7 mixer, setthe template to complex, set the number of mixers to 3, then enter the values as Bullfrog showed (the 1st [mixer] is mixer, the next [mixer] is mixer2 and the 3rd [mixer] is mixer 3).

Please Log in or Create an account to join the conversation.

Torch
Topic Author
Offline

01 Jun 2014 23:49 #23835 by Torch

Replied by Torch on topic Walkera LadyBug V2

Thank you do i add this to model.ini? I rather use notepad ++ method.

Please Log in or Create an account to join the conversation.

Torch
Topic Author
Offline

04 Jun 2014 18:45 #23908 by Torch

Replied by Torch on topic Walkera LadyBug V2

Resolved using Tom's Devo7E model.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.102 seconds

Re-enable mobile display