Syma X5SC Headless

Can someone share their Syma X5SC headless config? Not sure what channels is are what. Thanks!

You'll need the nightly from April 3 or later.
Channel 6: flip enable
7: take picture
8: start/stop video
9: headless mode

thanks hexfet! Is there a place that i can keep track of these updates? I also have a JJRC (v202) quad with headless and wonder if there's a working update/channel for it?

The forums here will have the latest news (the Recent Posts tab and Last Post links are helpful).
The list of merged pull requests will show most of what's going into the nightly builds. The commit list has all the details.

On the merged pull list is "#51: V202: add headless handling, 250kbps mode."

Do you use/recommend the 250kbps mode? i tried it on the v202 for jjrc but it wouldn't work when that was enabled.

30secs wrote: Do you use/recommend the 250kbps mode? i tried it on the v202 for jjrc but it wouldn't work when that was enabled.

The 250Kbits is only for Bradwii application :



www.rcgroups.com/forums/showthread.php?t=2278850

Does the Bradwii have any effect or benefits for quads like the Syma x5c/x11?

SeByDocKy wrote:

30secs wrote: Do you use/recommend the 250kbps mode? i tried it on the v202 for jjrc but it wouldn't work when that was enabled.

The 250Kbits is only for Bradwii application :



www.rcgroups.com/forums/showthread.php?t=2278850

30secs wrote: Can someone share their Syma X5SC headless config? Not sure what channels is are what. Thanks!

the X11 configuration might work. If someone has an X5 configuration to post, I'd suggest posting one level up, in the X5 thread I started. I'd like to see how folks switch 4 or 5 things on the 7E. I use the THOLD switch for the flips, and the FMODE switch for two speed ranges, but don't know how to also toggle channels 7 and 8 for the camera. The answer should be applicable up on the X11C configuration