Esky Protocol

... I cannot find the little bugger... I keep looking though, sorry for the delay...

...aaaand FOUND IT!!!

I have hidden the little bugger into the battery compartment of the E-Sky TX

Type: EK2-0424 2.4GHz 6-channel receiver.

So now that I have it, what should be the next step?

bm

OK, I'll build preliminary Esky Devo10 for you and put out to Builds later today. You do have an original Esky TX, so when time comes you could also test my implementation for interference.

Well, I do have... but it won't bind with the rx.
The binding process seems to work fine. the rx light signals are by the book. But the tx keeps "blinking"... This tells me that thr rx should work with a proper tx.
I can check for interference only with this limitation.

Please check www.deviationtx.com/forum/builds/2458-de...-esky-protocol-draft

Just for documentation purposes: ESky protocol is finally fully implemented and should be in nightly Deviation builds.

Just for fun, I tried to bind my Devo 7e (with a7105 and nrf24l01) to my old Esky Tandem coaxial and it worked!!!

Now I've got to try rebuilding the heli and trying it out.

Thanks for implementing this protocol!!!