VISUO XS809H-W-HD-G (Bayang X16 AH) capture

More
22 Oct 2017 08:39 #65188 by Elric
Capture 8MHz : 1drv.ms/u/s!AuNBpmXL1y0Rg8sNSfaqCRqGTLPG9w

VISUO_XM297LBX_1CSN_2SCK_3DATA_7VSS_8MHz_binding_start_motors_Land_Take-off.logicdata

CH11 : Land / Take-off not working with Bayang X16 AH.


Binding with Bayang X16 AH : ok



Attachments:

Please Log in or Create an account to join the conversation.

More
22 Oct 2017 11:28 - 22 Oct 2017 11:35 #65194 by goebish
Last edit: 22 Oct 2017 11:35 by goebish.

Please Log in or Create an account to join the conversation.

More
22 Oct 2017 11:46 #65195 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Can you better explain what you were doing during the capture ?
I can see an extra flag compared to the X16 AH, but I'm not sure when it's triggered.

Or just make another capture following this procedure exactly:
- tx off
- tx on / bind
- press take-off (only once)
- press landing (only once)
- press take-off twice in a row
- press landing twice in a row.

Please Log in or Create an account to join the conversation.

More
22 Oct 2017 14:17 - 22 Oct 2017 14:19 #65196 by Elric


Ooops !!! I do not have the same remote control as in the first message.

0. OFF
1. ON => the drone flashes very fast (I wait 3 to 5 seconds)
2. ARM => up an down => the remote control rings and the leds of the drone remain fixed in 1 at 2 seconds.
3. Start the engines with the STOP key.
4. take off with the Land - TakeOff key (the drone must climb to one meter from its position)

During my capture, there was no propeller. in step 4, I waited 3 to 4 seconds before pressing again TakeOff (4) then Stop (3).

I just finished flying tests with Bayang X16 AH that ended badly:

- CH11: ok it's an all-in-one channel: ignition of the engines and taking altitude at 50cm. the initial position down (-100): nothing happens. at the top (+100) engine start and takeoff. then maintain altitude. if crossing again down (-100): the drone goes down but it never cuts the engine!

All other functions are good (flips, headless, picture, video and return to home)

I lost an engine and / or the flight controller all in one => I'm down and it's my fault: I made a flip next to a tree (the drones do not like them trees :o)

I just ordered two other flight controllers and four engines (delivery in 10 to 20 days from China)
Attachments:
Last edit: 22 Oct 2017 14:19 by Elric.

Please Log in or Create an account to join the conversation.

More
22 Oct 2017 14:22 #65197 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Ok, so this one requires separate channels for start/stop and take-off/landing, understood.

Please Log in or Create an account to join the conversation.

More
22 Oct 2017 14:28 #65198 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
After your crash, are you still able to test ? Should I make a test build now ?

Please Log in or Create an account to join the conversation.

More
22 Oct 2017 14:31 - 22 Oct 2017 14:34 #65199 by Elric
Sorry, I can not do any more testing because three engines start and they stop after half a second because the fourth engine does not work anymore.

But maybe another member has this done.

XN297LBW :
Attachments:
Last edit: 22 Oct 2017 14:34 by Elric.

Please Log in or Create an account to join the conversation.

More
22 Oct 2017 14:34 #65200 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
No problem, just post again once you're ready :)

notes for myself: motors start/stop is emergency stop but it's using flag 0x08 instead of 0x04.
take-off / land flag is the same than X16 AH.

Please Log in or Create an account to join the conversation.

More
26 Apr 2018 22:59 #68874 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
I have this drone how do I capture protocols to help

Please Log in or Create an account to join the conversation.

More
27 Apr 2018 08:04 #68880 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Perhaps I can already make a test build, which transmitter do you have ?

Please Log in or Create an account to join the conversation.

More
27 Apr 2018 15:13 #68889 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture

Please Log in or Create an account to join the conversation.

More
27 Apr 2018 15:30 #68890 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Elric, are you still following this thread ?
I'd prefer someone with Deviation to test first.

Please Log in or Create an account to join the conversation.

More
27 Apr 2018 19:53 #68893 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Deviation what kind of transmitter would it be?

Please Log in or Create an account to join the conversation.

More
27 Apr 2018 19:55 #68894 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Any compatible Walkera Devo transmitter + nrf24 module or Jumper T8SG / T8SG Plus.

Please Log in or Create an account to join the conversation.

More
27 Apr 2018 21:39 #68895 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
I only have the ones that I informed myself
the 4 in 1 module would not be enough?

Please Log in or Create an account to join the conversation.

More
03 May 2018 22:55 #69009 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
could you make the test file available?

Please Log in or Create an account to join the conversation.

More
16 May 2018 00:43 #69250 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Bayang X16 AH
if you put both sticks diagonally inside the drone gun

Please Log in or Create an account to join the conversation.

More
08 Jun 2018 18:11 #69584 by HaCo
Hi,
I ordered an XS809S and looking forward to have it delivered, I hope next week.

I have Deviation on a Devo 7e transmitter with NRF24L01 module. Would be awesome if I could use this Tx for my drone, so tell me how I can help please.

This is the drone I bought:
www.ebay.co.uk/itm/VISUO-XS809S-RC-Aircr...p2057872.m2749.l2649

Please Log in or Create an account to join the conversation.

More
09 Jun 2018 09:09 #69590 by HaCo
Ordered a logic analyser from Banggood in the mean time as well, so if I have to measure out something... :D

Please Log in or Create an account to join the conversation.

More
31 Jul 2018 14:58 #70010 by saadasghar
Replied by saadasghar on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
is it possible to flash H8 Mini acro fimrware? without any problem? because both have F130G6.

Please Log in or Create an account to join the conversation.

Time to create page: 0.146 seconds
Powered by Kunena Forum