Advanced Search

Hi,

The firmware source is in

github.com/MarkR42/malenki-nano/tree/master/firmware/nano2

Mark

Hi I'm new here, I was searching for the source code of the AFHDS2A RX protocol. @markxr is it possible to get a copy of your source code? Thank.

Hi
No! On ground, when switching from 3D to 6G (and reverse), 2 servos change their position and incline cyclic...In 6G, if I correct the inclination of the cyclic with the rods, I can' t fly in 3D with this setting!!! Switching to 6G before or after or turning on the TX gives the same issue...

Are you starting in 3G and then trying to switch to 6G while in flight? If the gyros are not calibrated, that will cause erratic flight.
If you switch to 6G when not in flight, initiate calibration and then hover, are you having same issue?

Thank you!
I did that, but it' s nearly impossible to take off and land, because the cyclic incline,when going from 3D to 6G. And it seems to take seconds for each command: impossible to fly this way and calibrate!
But as I said, I' m not a beginner, and in 3D the heli is stable and reactive!

Read the xk110 instructions. You need to recalibrate the gyros in 6G mode.

<a href=> huggingface.co/spaces/andrewroyal/film-o...-online-lektor-pl.md </a>
<a href=> huggingface.co/spaces/andrewroyal/film-o...-online-lektor-pl.md </a>
<a href=> huggingface.co/spaces/andrewroyal/film-o...-online-lektor-pl.md </a>
<a href=> huggingface.co/spaces/andrewroyal/film-o...-online-lektor-pl.md </a>
<a href=> huggingface.co/spaces/andrewroyal/film-o...-online-lektor-pl.md </a>

Hi
I stay on that old thread because there is not an other interesting about xk k110 and 110s in this forum (or I don' t find)!
I have a DEVO 10, with 3in1 module,a K110s, and I modify the model.ini file taken above (thank you D_an_W ).I changed an inverted some things in order to fit the disposition of Devo 10 case.I had no need to change the Freq-Fine, binding without problem.Only one thing doesn't work: the 6G, when activated, the heli becomes crazy, and impossible to pilot, and the calibration is impossible because of that. I don't know if this comes from the TX or from the RX board??? But in 3D it is very stable! This is the more important! (but I wonder how a beginner could fly with the 6G mode!!!)
With the model.ini file, a modified toogle3.bmp in order to fit my configuration and an icon! I hope it could help! But if you have better model.ini, I' m interested in! Deviation is not very active, and I had difficulties to find one!!

Some news: After using the antenna provided with the 3in1 module, I finally test the double wire shown above with the genuine antenna, with a little anxiety (but the characteristics from the wires were the same as the genuine wires) and it works, range tests for Devo and Futaba are OK! Only one antenna is really convenient !
Thank you!

hey hubi-dirk looked at the Rc2shop.ch mate they don't deliver to the UK must be the last shop on the internet that has them
thanks for the reply.

cheers steve

www.rc2shop.ch/ersatzteile/multicopter-e...i26f99dgquirfgqs7lfg

The product has been discontinued and is out of stock

华科尔售后
电话/Tel. 020-84915115
手机/Cel. 13246850637
邮箱/ E-mail ：service.cn@walkera.com
网址/Web: www.walkera.com
广州市华科尔科技股份有限公司
广州市南沙区东涌镇太石工业区万泰路48号
Guangzhou Walkera Technology CO., LTD.

No.48 Wantai Rd, Taishi Industrial Park, Dongchong Town,

Nansha Dist, Guangzhou, China



From: STEPHEN PHILLIPS
Date: 2023-06-26 08:27
To: This email address is being protected from spambots. You need JavaScript enabled to view it.
Subject: walkera tali h500-z-21
hi,
are you making anymore tali h500-z-21 spare parts for the walkera h500 drone.
can't find any tali h500-z-21 all discontinued on the internet.
I see the walkera tali h500 is still on sale on the internet no good buying one if people cant get spare parts for it.

thank you
stephen phillips

I recently bought the XIAXIU H650 aircraft and was hoping to bind it to my 4in1 transmitter (Jumper T-Pro). Unfortunately, no protocol seems available so far. The built-in chip in the TX is an XN297LBW. The chip on the RX is not identifiable because the circuit board was dipped in clear lacquer to protect it from water. I have updated Open TX AND MULTIPROTOCOL. Who can help me or has the same problem with a XIAXIU product?

I recently bought the XIAXIU H650 aircraft and was hoping to bind it to my 4in1 transmitter (Jumper T-Pro). Unfortunately, no protocol seems available so far. The built-in chip in the TX is an XN297LBW. The chip on the RX is not identifiable because the circuit board was dipped in clear lacquer to protect it from water. I have updated Open TX AND MULTIPROTOCOL. Who can help me or has the same problem with a XIAXIU product?

Starts up fine and initialises then screen goes blue. All the menu's are accessible and settings made in them work to the receiver. Nothing appears amiss except this blank screen. Any thoughts would be welcome. Cheers Peter

The problem is caused by JTAG not completely disabled which was originated in early 2019 during major code restructure. It's quite strange nobody reported this problem for so many years. Maybe most have moved onto other transmitters. Anyway, I've created a pull request for the fix.

Just returned to the hobby after a few years break. Upgraded my Ultimate 7e to the latest build from Hexfet "deviation-devo7e-256-v5.0.0-408f8c0". Got the error message "Missing Modules: MultiMod" right after upgrade. Has the hardware.ini file format changed? I'm using the original multimodule by PB. Appreciate for any suggestions. Here is the modules section of hardware.ini file I'm using:

[EDIT]
Installed the official nightly build on 2021-06-06 "deviation-devo7e-256-v5.0.0-c84450e", same problem. Tried the official release "deviation-devo7e-v5.0.0" and it works fine.

Hi,

Other similar models can work too.
This is a model config I made from scratch so may be someone could do it better. Anyway it works for me.
Using the Devo 8s, don't know if it can work on other transmitters. You can change the flight stabilization using the FMOD switch (0=Beginner, 1=Middle, 2=Expert).

I also edit an icon for the BF-109 plane.

I answer myself: Yes, latest builds already support it.

I read with interest the several posts regarding rx. However I am not clear on the answers given. So.....which of the two rx (701 and 704) are ppm. I am slow on catching up buy will fit one of these rx to my F450 Quad. Would like to use serial but have Naza M Lite FC which doesnt do serial. never mind. I appreciate if you can help me.
Peter

Hi , I need a little help here .
I just bought a bladeinductrix and I'm trying to bind it with my Devo f7 but it won't bind.
Thankyou.