DeviationWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Hobby King Assault Reaper 500 with Devo12 config =====

Here are initial Settings for the Hobby King Assault Reaper 500 (like Stingray 500).

The Settings are like the settings from the manual with small improvements:

- If you switch the flight mode the Reaper will not jump or fall.

- The Hold=1 switches off the motor (for configuration and starting and crash)

- The ELEV D/R sets the sensitivity of Ele and Aile (mid  low - high)

- Mix Switch regulates the Gyro (80%/70%/50%) but this is not tested, I did not feel any difference. I Use an RX601 with Aux1 (Chan 5) to Aux1 (Reaper).

- The Timer is set to 7minutes, reset=TRN switch

I did not flip or things like this with the Reaper the settings are ok for hovering and regular drone flight.

Has anyone other settings so far?

I think with some small modifications in the ini File these Settings will work for other Devo models.

[[ .:hobby_king_assault_reaper_500_with_devo12_config:reaper500 ]]

DeviationWiki

User Tools

Site Tools

Page Tools