DeviationWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Version 3.0.0 =====

Version 3.0.0 was released on 

This is a major release of the Deviation firmware

**IMPORTANT: You must install the filesystem along with the new firmware.  Make sure to save your models first!**

==== Major Features ====
  * Devo7e support
  * Devo12 support
    * **Note that the Devo12 support uses the Devo8 GUI and does not take full advantage of the larger screen yet**
  * New 'standard' GUI for helicopters

==== Minor features ====
  * Telemetry support for DSM2/DSMX
  * New protocols
    * DSMX
    * Skyartec (needs CC2500 module)
    * WLToys protocol extensions
  * Repetitive low-battery alarm
  * Multiple hardware modules are supported
  * Support for hardware modules with or without power amplifier
  * PPM has more configuration options
  * Support for multiple icons per switch
    * Also support switch icons for Devo10
  * New 'permanent' timers
  * Add error-catching code to make it possible to debug reboots/hangs

==== Incompatibility ====
  * Switches are now numbered (e.g.GEAR0, GEAR1).  Deviation will properly convert old models, but older versions of Deviation will not properly support models made for version 3.0 or newer
  * The channel scale is applied after the safety value.  If safety is in use, make sure to check the values
  * The toggle icon locations have changed.  Generally all models will need to be reconfigured to use the new icons.  This was unintentional, but not easily rectified at this point.
  * If upgrading from a previous Deviation release and using an A7105 module (Flysky/Hubsan), the module will be initially disabled until you follow the directions here: https://www.deviationtx.com/forum/6-general-discussions/1572-flysky-module-users-you-need-to-read-this
DeviationWiki

User Tools

Site Tools

Page Tools
