User Tools

Site Tools


Joomla says you aren't logged in
sticky_throttle_hold

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

sticky_throttle_hold [2017/09/06 05:24]
mwm created
sticky_throttle_hold [2017/09/06 12:24] (current)
Moeder fix display of ini code
Line 5: Line 5:
 You can use a virtual channel as a switch with that property. The channel uses three mixers. The first one uses the old value of that channel, setting it to 100 or -100 with a min/max curve. The second mixer adds the current throttle output to that value with an offset, so that unless the throttle output is -100 or lower, the resulting switch will be on. The last mixer uses a physical switch to set the channel on if that switch is on, otherwise it leaves it at the last value. You can use a virtual channel as a switch with that property. The channel uses three mixers. The first one uses the old value of that channel, setting it to 100 or -100 with a min/max curve. The second mixer adds the current throttle output to that value with an offset, so that unless the throttle output is -100 or lower, the resulting switch will be on. The last mixer uses a physical switch to set the channel on if that switch is on, otherwise it leaves it at the last value.
  
 +
 +<​code>​
 [virtchan1] [virtchan1]
 name=T Hold name=T Hold
Line 26: Line 28:
 usetrim=0 usetrim=0
 curvetype=fixed curvetype=fixed
 +</​code>​
sticky_throttle_hold.txt (67607 views) ยท Last modified: 2017/09/06 12:24 by Moeder