MoonTop M9916

I was not able to make this version bind with an H7.
The one you've posted about 6 weeks ago (with Protocol H7) works.

Would you mind posting your model.ini?!

Thank you very much!

Probably too few know about it. Perhaps you should crosspost it to rcgroups?!
www.rcgroups.com/forums/showthread.php?t=2412599

There is actually a link to your other/previous thread on here, the one about H7 support.
It was posted by SeByDocKy about 6 weeks ago:
www.rcgroups.com/forums/showthread.php?t=2412599&page=16

goebish wrote: Ok, I have an idea why it wouldn't work, Ill check tonight.

Maybe I'll remove mt99xx as nobody seems to really be interested (nobody has tested in 6 weeks ...)

Sorry, I didn't see your answer I will test asap

Ok I tested with my devo7E .... and I got a "bas/missing protocol modules"... no problem for other nRF24L01 protocols ...

I also get the 'missing protocol' message.
Also, please don't forget to add your model.ini
so we can see how you've configured the 3-way switch for ch.5

Same problem here. A few days ago I merged your protocol with my local repo. I got the same missing module error but since I'm not expert, and nobody report the error, I guessed was my mistake

Since there is no H7 protocol in this version, I changed it to MT99.
But the H7 does not bind.

Nice video by the way.

I get it once I have installed this firmware image.
Since I've replaced it again with your H7 version from six weeks ago, I am not sure
if I still get it once I've changed the protocol to MT99. But binding is not possible.

goebish wrote: Or maybe that's because I named the protocol MT99 and the Devo 7e module file is named mt99xx (I had to remove 2 characters or it wouldn't build before last PB code size optimization).

Check that you've the right protocol selected first, if you're still having the same issue I'll rename it.

Bingo

goebish wrote:

SeByDocKy wrote: Bingo

You mean you manually renamed the .mod then it works ?

Yes .... it's binding but .... behaviour so so eratic..... throttle do nothing after sometimes yes ... Maybe some delay
There is modulo to give ?

Just tried it again on the H7:

After renaming the protocol to mt99 (removing the xx) I can bind.
Then I had to switch Aileron with elevator.
There are two issues however:

Aileron works only to the right.
Moving the stick to the left makes almost no difference from the middle position.

When switching to USB-Mode it hangs when turning USB Mode off again.
I have to turn the 7e off and on again.