Switch beeper

Start
Prev
1
Next
End

magic_marty
Topic Author
Offline

11 Jul 2013 05:52 #12173 by magic_marty

Switch beeper was created by magic_marty

Would it be possible to add a beeper to a switch? Say i want to have it beep when i have a assigned switch flipped..to remind me i have a certain mode selected.If i am flying my T copter in ACRO mode there is no beep but when i flip the switch to self level the TX beeps every second or so to remind me i am in self level mode...Would be cool to have different styles of beeps like a short beep for one mode and maybe a double beep beep then a pause and beep beep again for a different mode? Just a thought..

Thanks all...

Please Log in or Create an account to join the conversation.

clearprop88
Offline

11 Jul 2013 15:40 #12187 by clearprop88

Replied by clearprop88 on topic Switch beeper

I have a related request.
My Spectrum DX8 warns me with an alarm when any switch is on, and also if the throttle is up when I turn on the TX.
I think this is an important safety feature.
Is it possible to include this feature in the next Deviation release?

Please Log in or Create an account to join the conversation.

FDR
Offline

11 Jul 2013 16:51 #12189 by FDR

Replied by FDR on topic Switch beeper

There is a safety warning in deviation at startup, but you can only configure it in the ini file.
By default there is a safety section like this:

[safety]
auto=min

...which means the throttle channel apropriate to the current protocol should be at it's minimum value at startup, otherwise a warning message is shown.
However you can specify additional values for other channels too...

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.028 seconds

Force desktop display