Devo 7e wont show up as an available device

Looking for help installing deviation on my devo 7e , i have read all the instructions followed step by step! Im able to open the install tool but my tx isnt showing up in available DFU devices. Tried on win 7, even tried on Windows vista! Tx os showing linked to pc! Any and all help will be very appreciated

Did you install the USB drivers?
www.deviationtx.com/downloads-new/category/161-dfu-usb-tool
Download the v1.1 version for Windows.

Yeah, im honestly stumped

Did you insert the USB plug all the way into 7e? I have no more ideas for you, sorry.

westyflyer#11 wrote: Tx os showing linked to pc! Any and all help will be very appreciated

OK ignore that, Devo has no clue if it's connected to USB / Dfu or not (hold ENT or Ext and power up WITH NO USB INSERTED and it'll still give you the correct icon like its CONNECTED cause it doesn't care, it's up to the computer to work right, it just goes about its day either way...


First step is to go into device manager and look for the device to be recognized when you plug it in and power it up (check in both USB and Dfu modes). You didn't mention what drivers you've installed so I'm guessing it won't be recognized...

Deviation usb drive was installed on both my PC's, tried both uploaders, but still wont show my tx, ive even went through both PC'S and made sure adobe, and java are up to date and working

And you are entering Upgrade mode by starting up the Devo while holding down the "Ext" key - not the "Ent" key, correct?

Yeah, tx shows on display screen "program update".

Ok, great!
Now, verify that you have a sound USB connection (cable or port). Start the Devo in USB mode (Ent key) and check that the device has mounted.

Reading and showing tx connected

westyflyer#11 wrote: Reading and showing tx connected

Just so I'm clear here, are you saying that your Devo mounts as a USB device on your computer?

Yeah on both my windows 7, and vista

in device manager what does the devo in programming mode show up as? also what driver has it loaded?

It shows up as STM DFU (WinUSB), amd uploader 0.8.0

WinUSB is the wrong device, must be STTub30 device for DFU mode. If you cannot fix this manually on your system, please use Zadig (device changer).
Works on Win7 with Dfuse USB Upgrade Tools 2.30 or 2.31.

Ok got it!! Successfuly installed!!! Thanks too everyone who helped and gave advise, I really appreciate it!