- Posts: 2
Here's the help
- nikola
-
Topic Author
- Offline
Less
More
04 Jan 2021 01:24 #77157
by nikola
Need help was created by nikola
So recently I bought a DEVO 7 Transmitter and I want to make an rc Delta wing. But I don't know how to program it can someone help me
As far as I know about the delta wing.. I have to make 2 aileron move at the same time to move up and down and to move separately so you can't turn right or left.. but that is all my knowledge and most important I don't have any knowledge how to program it can someone help me step by step?
the transmitted I want to use
imgaz1.staticbg.com/thumb/view/oaupload/...48d-f9169507ebd2.jpg
As far as I know about the delta wing.. I have to make 2 aileron move at the same time to move up and down and to move separately so you can't turn right or left.. but that is all my knowledge and most important I don't have any knowledge how to program it can someone help me step by step?
the transmitted I want to use
imgaz1.staticbg.com/thumb/view/oaupload/...48d-f9169507ebd2.jpg
- trompi
-
- Offline
Less
More
- Posts: 9
- trompi
-
- Offline
Less
More
- Posts: 9
- nikola
-
Topic Author
- Offline
Less
More
- Posts: 2
04 Jan 2021 18:21 #77161
by nikola
Replied by nikola on topic Here's the help
Ty for the help but is it possible what I had I'm my mind
I want when I press ELEV on the controller - the delta wing to go up or down
and when I press AILE to turn Left and right
IS it possible?
I want when I press ELEV on the controller - the delta wing to go up or down
and when I press AILE to turn Left and right
IS it possible?
- trompi
-
- Offline
Less
More
- Posts: 9
05 Jan 2021 14:10 #77162
by trompi
Replied by trompi on topic Here's the help
tilt aileron and elevator turning
- trompi
-
- Offline
Less
More
- Posts: 9
- Fernandez
-
- Offline
Less
More
- Posts: 983
08 Jan 2021 08:33 #77164
by Fernandez
Replied by Fernandez on topic Here's the help
here is also info and model files, you can try:
www.deviationtx.com/forum/model-requests...or-flying-wing#66897
Time to create page: 0.031 seconds
-
Home
-
Forum
-
News, Announcements and Feedback
-
Feedback & Questions
- Here's the help