jumper T8SG PLUS BIND frsky XM+ ACCST 2.1.2 FCC

More
18 May 2021 15:29 #77389 by v_nebe
I can't bind the device data, which I just haven't tried.
Who bindil help what steps did you take??
Help!!!!!

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 11:27 #77429 by Ale64
Anche io non riesco bindare frsky XM+ , potrebbe essere necessario flash EU ma non so proprio come si potrebbe risolvere, qualcuno ci può aiutare??

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 16:37 #77430 by mj666
There is a update required to bind with the latest XM+ firmware 2.1.2. I have this working for the Devo10 and can do the related PR. The code is based on a update done for the MPM. For the moment you can downgrade the XM+ firmware to 2.1.0 to get it to work.

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 16:57 #77431 by mj666
Have prepared the PR with the required update.

github.com/DeviationTX/deviation/pull/1011

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 17:21 #77432 by Ale64
Scusate ma con la mia T8SG , come si potrebbe fare? Ci sono altri modi per aggiornare?

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 18:48 #77433 by mj666
@Ale64, @v_nebe here is the latest build for your transmitter including the fix. Please give it a try.
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 19:15 #77434 by v_nebe
I've never been able to put it all together. I ordered a frsky R-XR receiver, connected it without any problems. To connect the XM+, you need to flash it through taranis, and since I don't have that hardware, I've pushed the XM+ to the background.

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 19:17 #77435 by v_nebe
In addition to the firmware via taranis, I did not find another way. If anything succeeds, please write.

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 19:28 #77437 by Ale64
Riassumendo, non si può fare! Giusto?

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 19:53 - 11 Jun 2021 19:54 #77438 by mj666
With the Deviation build above you should be able to bind the XM+ with any installed firmware. If you don't know what firmware is installed on the XM+ you need to try all 4 posible options in the worst case. One of this will bind.
Last edit: 11 Jun 2021 19:54 by mj666.

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 21:20 #77439 by Ale64
Non funziona sulla mia radio, si oscura lo schermo. Allego foto
Attualmente ho istallato la V5.0.0-1c43d1b , allego modello
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 21:37 #77440 by v_nebe
This happened because the firmware was crooked. Most likely you made a mistake in choosing the file not for your equipment.

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 21:41 #77441 by v_nebe
Не пугайтесь. Проделйте все те же действия обновления прошивки, только для t8sg_v2-v5.0.0-c84450e
У меня была та же проблема.

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 21:46 #77442 by Ale64
Forse V2 e V3 ci sono differenze

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 21:52 #77443 by v_nebe
На сайте jumper стандартная прошивка идёт v2. www.jumper-rc.com/download/t8sg-plus-v3/

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 21:54 #77444 by v_nebe
У меня такая же аппаратура. Неделю пытался соединить t8sg с xm+. Перепробовал все способы. Даже open tx пытался вшить, без успешно.

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 22:05 #77445 by Ale64
L'ho buttata nella spazzatura

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 22:07 #77446 by v_nebe
Оставьте приёмник с него можно взять антены как минимум

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 22:10 #77447 by v_nebe
Название аппаратуры v3 скорее всего из за дизайна. А программное обеспечение v2. Как я понял все необходимые модули в этой аппаратуре есть. Дело в ошибках в прошивке.

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 22:23 - 11 Jun 2021 22:25 #77448 by Ale64
Ok capito. Altra informazione: lo slot per microSD, a che serve? Forse era meglio comprare la T12 con openTX
Last edit: 11 Jun 2021 22:25 by Ale64.

Please Log in or Create an account to join the conversation.

Time to create page: 0.061 seconds
Powered by Kunena Forum