Devo 10, FM 4.0.1, DSMX
Hello,
I read through the complex mixer tutorials and 'just' found that, if I was about to slow down servo action(s), this only works for the whole mixed sources. What I would like to achieve is to set up a flaperon speedbrake combined with an elevator mixed in with the action slowed down (switch position: FMODE0 to FMODE1). I.e. I thought about 20% of flaperons with a delay of 1 or 2 seconds from switching to the end positions. Basically it works but so far the delay remains for all the sources mixed together until I switch back to the ailerons' normal flight position.
Any of your ideas are much appreciated. Thanks.
Best regards,
Stefan