1. Forum
  3. General
  5. General Discussions
  7. Cleanflight with Devo 10 and RX1002

Cleanflight with Devo 10 and RX1002

More
02 Jul 2015 15:45 #34987 by liliass
Cleanflight with Devo 10 and RX1002 was created by liliass
Hi all,

Does anyone having any issue with Cleanflight 1.9 (CC3D board)only able to detect AUX1 only whereas AUX 2,3,4 does not working ?

Thank you.

Please Log in or Create an account to join the conversation.

More
02 Jul 2015 16:25 #34991 by FDR
Replied by FDR on topic Cleanflight with Devo 10 and RX1002
Have you calibrated the pots too together with the sticks?

Please Log in or Create an account to join the conversation.

More
02 Jul 2015 16:34 #34995 by liliass
Replied by liliass on topic Cleanflight with Devo 10 and RX1002
Yes, all of them working except AUX 2 3 and 4
I can't arm the motors now.

Please Log in or Create an account to join the conversation.

More
02 Jul 2015 16:46 #34997 by Cereal_Killer
Replied by Cereal_Killer on topic Cleanflight with Devo 10 and RX1002
You dont have any PPM receivers enabled in CF do you? All standard RX settings? You have all channels directly wired (i.e. 1 to 1, 2 to 2 ect...)?
Taranis X9E | DEVO 10 | Devo U7E | Taranis Q7

What I do in real life: rivergoequestrian.com/

Please Log in or Create an account to join the conversation.

More
02 Jul 2015 16:59 #34999 by liliass
Replied by liliass on topic Cleanflight with Devo 10 and RX1002
Nope. I did not enable PPM in CF (CC3D board)
All standard setting direct wired. 1 to 1.


please guide me how to get AUX2 , AUX3 , AUX4 working.
Appreciated.


(sorry for my english. asian)

Please Log in or Create an account to join the conversation.

More
02 Jul 2015 17:23 #35001 by Cereal_Killer
Replied by Cereal_Killer on topic Cleanflight with Devo 10 and RX1002
Can you please go to your channel monitor page (in the transmitter) and make sure you have channels being outputted?
Taranis X9E | DEVO 10 | Devo U7E | Taranis Q7

What I do in real life: rivergoequestrian.com/

Please Log in or Create an account to join the conversation.

More
02 Jul 2015 18:32 #35003 by liliass
Replied by liliass on topic Cleanflight with Devo 10 and RX1002
i assume this is what u r asking for.
Attachments:

Please Log in or Create an account to join the conversation.

More
02 Jul 2015 18:44 - 02 Jul 2015 19:10 #35004 by liliass
Replied by liliass on topic Cleanflight with Devo 10 and RX1002

here we go


Attachments:
Last edit: 02 Jul 2015 19:10 by liliass.

Please Log in or Create an account to join the conversation.

More
02 Jul 2015 18:46 #35006 by liliass
Replied by liliass on topic Cleanflight with Devo 10 and RX1002
here we go part 2






Attachments:

Please Log in or Create an account to join the conversation.

More
03 Jul 2015 05:05 #35021 by liliass
Replied by liliass on topic Cleanflight with Devo 10 and RX1002
with the above 2 posts. 8CH are working perfectly. but Cleanflight only detect CH2,3,4,5,6
But not CH1,7,8

Please Log in or Create an account to join the conversation.

More
03 Jul 2015 05:17 #35022 by Cereal_Killer
Replied by Cereal_Killer on topic Cleanflight with Devo 10 and RX1002
What receiver is this?
Taranis X9E | DEVO 10 | Devo U7E | Taranis Q7

What I do in real life: rivergoequestrian.com/

Please Log in or Create an account to join the conversation.

More
03 Jul 2015 05:42 #35026 by liliass
Replied by liliass on topic Cleanflight with Devo 10 and RX1002
RX1002, come with Devo 10.

Please Log in or Create an account to join the conversation.

  1. Forum
  3. General
  5. General Discussions
  7. Cleanflight with Devo 10 and RX1002
Time to create page: 0.786 seconds
Powered by Kunena Forum
Force desktop display