Devention F7 transmitter stuck in Program Update

Start
Prev
1
Next
End

wpincumbe
Topic Author
Offline

04 Jan 2018 15:27 - 11 Jan 2018 22:08 #66711 by wpincumbe

Devention F7 transmitter stuck in Program Update was created by wpincumbe

I have a devo F7 transmitter and was attemption to update. Now the device is stuck in "Update" mode. I have tried to turn on holding the "Ext" button as well as the "Ent" button. I cannot seem to get the unit out of this mode., I used the DFuse 2.31 version, and at first this seemed to allow me to get out of "Program Update", I have not turned the transmitter back on and again its in the "Program Update" Please help me is there a way to factory reset the unit,

Last edit: 11 Jan 2018 22:08 by wpincumbe.

vlad_vy
Offline

05 Jan 2018 06:26 #66719 by vlad_vy

Replied by vlad_vy on topic Devention F7 transmitter stuck in update

What program and firmware do you use for update?

wpincumbe
Topic Author
Offline

05 Jan 2018 16:07 #66726 by wpincumbe

Replied by wpincumbe on topic Devention F7 transmitter stuck in update

I used the Devo F7 Firmware 0.6A.dfu and the Dfuse-USB upgeade tools 3.0.5.zip

vlad_vy
Offline

05 Jan 2018 16:40 #66728 by vlad_vy

Replied by vlad_vy on topic Devention F7 transmitter stuck in update

Try to use Dfuse USB upgrade tool 2.31

drive.google.com/drive/folders/0B6SupsT8-3_BYXNQM1dOUlRYcGM

or

walkera-fans.de/downloads/tools/dfuse/

des
Offline

23 Sep 2018 08:35 #71016 by des

Replied by des on topic Devention F7 transmitter stuck in update

Can you help me too.

I have devo F7 controller and is now stuck in Program update mode and nothing happens.

I have download the files that you have linked and tried upgrading the .bfu files but nothing happens. It says complete but I restart the controller and same thing.

Thanks