Wowitoys Space racer H4816

Hello All, I'm wondering how I can control this little quad with my Devo 7e with deviation. I'm trying to find out which protocol this has, is there an obvious way to find out? Is there a certain chip I need to see on the f/c?

Kindest regards
Trevor

I took the small TX apart, on the pcb is printed FJ-2W7L1 and on the chip next to the antennae is KSL297L. Further investigation gave me this info...

KSL297L Is a work in 2.400~2.483GHz UniversalI SMBand of single-chip

Is this a know protocol by anyone here? Is this supported by deviation?

regards
Trevor

I feel your pain. H4816 owner here. I would like to use my jumper t8sg as the remote controller instead of that small one. If anyone succeeded in binding deviation transmitter with this drone, please share your settings.

SpriteyC wrote: the chip next to the antennae is KSL297L.

From a datasheet online this chip seems to be a clone of the XN297. The deviation protocols to try are (protocol: formats):
HonTai: Hontai, FQ777
CG023: all
MT99XX: all
MJXq: WLH08, X600, X800, E010
Bayang: all
CX10: all
H8-3D: all
DM002
Q303: all
GW008

hexfet wrote:

SpriteyC wrote: the chip next to the antennae is KSL297L.

From a datasheet online this chip seems to be a clone of the XN297. The deviation protocols to try are (protocol: formats):
HonTai: Hontai, FQ777
CG023: all
MT99XX: all
MJXq: WLH08, X600, X800, E010
Bayang: all
CX10: all
H8-3D: all
DM002
Q303: all
GW008

Thank you, but that didn't help. In fact, I already tried every possible protocol/format combination before your post, I took me over 1 hour on my Jumper T8SG to do that. This is the second mini quad I can't control with my Jumper (Eachine E70, H4816). And quads I can't control with Jumper, quickly going to the basement. Pity, because H4816 is really great flier.