×
Important information

To file a bug, find instructions here: Reporting bugs

Please only post images or files to this forum which you either own the copyright to or you are sure can be distributed under an open source license.

Jumper T8SG Plus V2 Model Add Help Please

More
29 Sep 2018 19:16 - 29 Sep 2018 19:16 #71095 by nacraracer
Jumper T8SG Plus V2 Model Add Help Please was created by nacraracer
I am copying and pasting the XK K110 and K123 .ini files to my model list while connected via USB and then they wont show up on the Tx after I unplug it. What am I doing wrong? I'm brand new to this Tx and need some help.
Last edit: 29 Sep 2018 19:16 by nacraracer.

Please Log in or Create an account to join the conversation.

More
02 Oct 2018 21:04 #71152 by nacraracer
Replied by nacraracer on topic Jumper T8SG Plus V2 Model Add Help Please
Anyone?

Please Log in or Create an account to join the conversation.

More
02 Oct 2018 23:56 #71155 by hexfet
Replied by hexfet on topic Jumper T8SG Plus V2 Model Add Help Please
Be sure to eject the USB drive before unplugging or powering off the tx.

Please Log in or Create an account to join the conversation.

More
03 Oct 2018 01:18 #71156 by Gerry
Replied by Gerry on topic Jumper T8SG Plus V2 Model Add Help Please
is your ini correctly named? eg. modelx.ini where x is a number between 1-30

Devo 7e A7105 NRF24L01 CC2500 2x3 way & voice, Devo 12e 4 in 1 & voice.
FFS (Forever Fixing Stuff)

Please Log in or Create an account to join the conversation.

More
04 Oct 2018 23:31 #71180 by nacraracer
Replied by nacraracer on topic Jumper T8SG Plus V2 Model Add Help Please
The naming was the problem. Thank you very much for this information.

Please Log in or Create an account to join the conversation.

Time to create page: 0.266 seconds
Powered by Kunena Forum