×
Important information

To file a bug, find instructions here: Reporting bugs

Please only post images or files to this forum which you either own the copyright to or you are sure can be distributed under an open source license.

T8SG Plus with FrSky S8R

More
02 Oct 2018 05:23 #71137 by Plumann
T8SG Plus with FrSky S8R was created by Plumann
Hello everybody,

I can not tie my JumperV2 / Plus (FCC) with a FrSky S8R.
I use the protocol FrSkyX. In the transmitter I have set 8 channels and at the receiver no jumpers are set.

Due to the "Channel Finetuning" I get a bad binding in the range -80 to +40.
But here the green LED only flickers and the servos only run with twitches.
What else can I change? Is the receiver defective?


Many thanks in advance

Thomas

Please Log in or Create an account to join the conversation.

More
02 Oct 2018 16:49 #71150 by Wene001
Replied by Wene001 on topic T8SG Plus with FrSky S8R
Normally in this case Finetuning -20 should bring a stable connection.
take at least 1m distance between RX and TX to avoid swamping.

Please Log in or Create an account to join the conversation.

Time to create page: 0.309 seconds
Powered by Kunena Forum