jumper T8SG and voice

hello
i just installed the dfplayer module and i made the soft modifications described in the tutorial (followed to the letter)
or on my radio it appears in the voice menu: 'external voice currently not avaible'
will I have to forget something?
thanks for your help

I just installed the dfplayer in t8sg v2 plus following the instructions in the wiki and everything worked fine. Recheck your file changes and voice.ini and SD card mp3 directory.

problem solved. in the firm there are 2 lines voice and in the topic it is not said to delete one. now everything works

Pardon me but Im having similar issues.

I cant see my DFPlayer usb drive after I soldered it in, was worried I missed some pins.

I can only see my Transmitter usb drive. Not a separate one for the SD card. Is there anything you need to do other then format the card and have the mp3 folder on it?

The dfplayer doesn't show up as a drive. There's no circuitry for that. Some folks add a second usb connector wired directly to the dfplayer.

Load the files on the SD card with a PC.

Sweet baby Jesus it worked. Thank you so much!. Just is a file source.
Deleting the ; for uart5 and coping voice.ini into media folder on transmitter were the hard part.
This is a wonderful site.