4 in 1 module hardware.ini help

More
10 Aug 2019 13:50 - 10 Aug 2019 13:51 #74852 by qprhooligan
4 in 1 module hardware.ini help was created by qprhooligan
I have a devo 7e and i just installed a 4 in 1 module. I connected the 2401 to the 50th pin on the one controller pin, and connected the 2500 to pin 10 on the control board and the 7105 to the pin 9 on the control board. What should I modify the hardware.ini to from this...

[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
has_pa-cyrf6936 = 0
; enable-a7105 = A13
; has_pa-a7105 = 1
; enable-cc2500 = A14
; has_pa-cc2500 = 1
; enable-nrf24l01 = A14
; has_pa-nrf24l01 = 1
; enable-multimod = A13
Last edit: 10 Aug 2019 13:51 by qprhooligan.

Please Log in or Create an account to join the conversation.

More
10 Aug 2019 19:08 #74853 by propnut
Replied by propnut on topic 4 in 1 module hardware.ini help
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = A15
has_pa-nrf24l01 = 1
; enable-multimod = A13

Please Log in or Create an account to join the conversation.

Time to create page: 0.029 seconds
Powered by Kunena Forum