How do I adjust the stick endpoints?

  • muzzlitebeer
  • muzzlitebeer's Avatar Topic Author
  • Away
More
30 Jun 2020 08:33 #76542 by muzzlitebeer
How do I adjust the stick endpoints? was created by muzzlitebeer
How do you adjust the endpoints of the sticks in Deviation TX?

In OpenTX, you can adjust them in the 'outputs' screen. Is there an equivalent thing in Deviation?

Please Log in or Create an account to join the conversation.

More
30 Jun 2020 14:16 - 30 Jun 2020 14:17 #76544 by 52dgj
Replied by 52dgj on topic How do I adjust the stick endpoints?
Please refer to this link. www.deviationtx.com/manuals/html-devo10-...hannel-configuration Scale- / Scale +and Subtrim

DEVO12,DEVO8S,DEVO7E,DEVO10,Taranis QX7,FS-i6
Last edit: 30 Jun 2020 14:17 by 52dgj.

Please Log in or Create an account to join the conversation.

  • muzzlitebeer
  • muzzlitebeer's Avatar Topic Author
  • Away
More
01 Jul 2020 03:08 #76546 by muzzlitebeer
Replied by muzzlitebeer on topic How do I adjust the stick endpoints?
Thank you...

Please Log in or Create an account to join the conversation.

  • muzzlitebeer
  • muzzlitebeer's Avatar Topic Author
  • Away
More
28 Sep 2020 12:40 #76836 by muzzlitebeer
Replied by muzzlitebeer on topic How do I adjust the stick endpoints?
Sorry. The day after I wrote this, my Jumper T16 arrived, so I haven't used the T8SG again until today.

I'm trying to set the T8SG up for my son and I don't understand how to use the information in the link given above. Could someone talk me through how to do it?

Example, my 'roll' (Aileron) has a minimum of 1010 and a maximum of 1993. I adjusted the Min Limit from -150 to -190 and the Max Limit from 150 to 190, but nothing changed in Betaflight. It was still 1010 to 1993.

Am I missing a step?

Cheers in advance.

Please Log in or Create an account to join the conversation.

More
28 Sep 2020 13:32 #76837 by vlad_vy
Replied by vlad_vy on topic How do I adjust the stick endpoints?
"Limit" do nothing with travel adjustment, it stop excess travel. For travel adjustment use "Scale".

Please Log in or Create an account to join the conversation.

Time to create page: 0.037 seconds
Powered by Kunena Forum