Assigning arming sequence to 1 switch.

More
28 Jul 2016 02:14 #52225 by C0ckpitvue 777
Assigning arming sequence to 1 switch. was created by C0ckpitvue 777
Can someone please link me to a tutorial on how to assign a switch to arm and disarm a quad instead of using the stick sequences,quad I have in mind is the bayang toys x16.All links and feedback is greatly appreciated.

Please Log in or Create an account to join the conversation.

More
28 Jul 2016 14:11 #52235 by mwm
Replied by mwm on topic Assigning arming sequence to 1 switch.
Without knowing the stick sequence, it's hard to provide a specific tutorial.

I wrote one for the 200Qx at rc.mired.org/p/writing-deviationtx-model.html (look for "initialize the flight controller"). That might help get you started.

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

More
29 Jul 2016 00:01 #52249 by C0ckpitvue 777
Replied by C0ckpitvue 777 on topic Assigning arming sequence to 1 switch.
Thank you mmw,this is a great write.It is also very informative,I will read it.Thank you this is greatly appreciated God bless.

Please Log in or Create an account to join the conversation.

Time to create page: 0.030 seconds
Powered by Kunena Forum