Activate a 3 Point Swich,.T8SG V2 Plus

More
07 Dec 2018 12:10 #72002 by Roterbaronsz
Activate a 3 Point Swich,.T8SG V2 Plus was created by Roterbaronsz
Hello

Sorry for my English. I am from Switzerland. Anyone speak or write German?

I would activate the 3Way Switch A. Now i have the Problem the Switch is in Position A1 on -100% in Position A0 on 100% and in Position A2 on -100%
I want Programm A1= 100%....A0= 0%...A2= -100%
Can anyone help mi.

Greetz from Switzerland
Roman

Please Log in or Create an account to join the conversation.

More
07 Dec 2018 12:28 #72003 by Roterbaronsz
Replied by Roterbaronsz on topic Activate a 3 Point Swich,.T8SG V2 Plus
Ahhh i have the Jumper T8SG V2

Please Log in or Create an account to join the conversation.

More
23 Dec 2018 15:29 #72102 by Brett_N
Replied by Brett_N on topic Activate a 3 Point Swich,.T8SG V2 Plus
Go to Mixer and scroll down to the channel A0 is on. (CH5?)

Should say SIMPLE - selct SIMPLE and hit ENT
Down arrow to Select the Switch SRC (SW A0)
Push ENT - this should reverse the switch

Should show as !SW A0
Expo 0

Please Log in or Create an account to join the conversation.

More
04 Feb 2019 05:07 #72702 by Ultracon
Replied by Ultracon on topic Activate a 3 Point Swich,.T8SG V2 Plus
I need to activate a 3 point switch with the three flight modes on my SAFE receiver. Beginner, intermediate, experienced. I have channel 5 on toggle A. I also need to program a two position switch for auto recovery, or on-off for channel 6. Presently Ch6 is on toggle H so it is next to toggle A. Can you help?

Please Log in or Create an account to join the conversation.

More
24 Feb 2019 05:38 #72998 by Ultracon
Replied by Ultracon on topic Activate a 3 Point Swich,.T8SG V2 Plus

Roterbaronsz wrote: Hello

Sorry for my English. I am from Switzerland. Anyone speak or write German?

I would activate the 3Way Switch A. Now i have the Problem the Switch is in Position A1 on -100% in Position A0 on 100% and in Position A2 on -100%
I want Programm A1= 100%....A0= 0%...A2= -100%
Can anyone help mi.

Greetz from Switzerland
Roman


This Youtube video is the best. It helped me set up the switches. Haven't tested it out yet, but I am hopeful.

Please Log in or Create an account to join the conversation.

Time to create page: 0.236 seconds
Powered by Kunena Forum