Eachine E011 and devo 12s

More
17 May 2017 15:19 #62386 by sv650s
Eachine E011 and devo 12s was created by sv650s
Hi all,
I've just received my eachine E011 and i would like to bind it on my DEVO 12S flashed
But I don't know witch protocole i must use...
Could you help me please ?

Thanks for your help

Please Log in or Create an account to join the conversation.

More
17 May 2017 17:28 #62388 by aMax
Replied by aMax on topic Eachine E011 and devo 12s

Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02

Please Log in or Create an account to join the conversation.

More
17 May 2017 18:21 #62389 by sv650s
Replied by sv650s on topic Eachine E011 and devo 12s
The e011 is not in this list, but it's good i have found the good protocol
The e011 fly very good

Please Log in or Create an account to join the conversation.

More
02 Jun 2017 06:35 #62753 by Big Jeff
Replied by Big Jeff on topic Eachine E011 and devo 12s
Where did you get the E011 protocol ?
I would like to install it into my devo E7 Tx
Can you please share the link

Please Log in or Create an account to join the conversation.

More
02 Jun 2017 17:43 #62773 by Deal57
Replied by Deal57 on topic Eachine E011 and devo 12s
Added Eachine E011 to supported models. It's a clone of the Boldclash B03, so I added that as well, however the E011 does not have Alt hold or some other features of the B03.

Deviation Devo7e 3way switch mod, A7105, NRF24L01
Devo6s 2x2 switch mod, trim mod, haptic, multimodule, A7105, NRF24L01, CC2500
Devo12e 4-in-1 with voice mod -- it speaks!!

Please Log in or Create an account to join the conversation.

More
08 Aug 2017 00:18 #63755 by Big Jeff
Replied by Big Jeff on topic Eachine E011 and devo 12s
I received some help from :-
jtgravityRC
With this video to show how to set it up:

Works great now.

Please Log in or Create an account to join the conversation.

Time to create page: 0.032 seconds
Powered by Kunena Forum