VISUO XS809H-W-HD-G (Bayang X16 AH) capture

Capture 8MHz : 1drv.ms/u/s!AuNBpmXL1y0Rg8sNSfaqCRqGTLPG9w

VISUO_XM297LBX_1CSN_2SCK_3DATA_7VSS_8MHz_binding_start_motors_Land_Take-off.logicdata

CH11 : Land / Take-off not working with Bayang X16 AH.

Binding with Bayang X16 AH : ok

Ooops !!! I do not have the same remote control as in the first message.

0. OFF
1. ON => the drone flashes very fast (I wait 3 to 5 seconds)
2. ARM => up an down => the remote control rings and the leds of the drone remain fixed in 1 at 2 seconds.
3. Start the engines with the STOP key.
4. take off with the Land - TakeOff key (the drone must climb to one meter from its position)

During my capture, there was no propeller. in step 4, I waited 3 to 4 seconds before pressing again TakeOff (4) then Stop (3).

I just finished flying tests with Bayang X16 AH that ended badly:

- CH11: ok it's an all-in-one channel: ignition of the engines and taking altitude at 50cm. the initial position down (-100): nothing happens. at the top (+100) engine start and takeoff. then maintain altitude. if crossing again down (-100): the drone goes down but it never cuts the engine!

All other functions are good (flips, headless, picture, video and return to home)

I lost an engine and / or the flight controller all in one => I'm down and it's my fault: I made a flip next to a tree (the drones do not like them trees )

I just ordered two other flight controllers and four engines (delivery in 10 to 20 days from China)

Sorry, I can not do any more testing because three engines start and they stop after half a second because the fourth engine does not work anymore.

But maybe another member has this done.

XN297LBW :

I have this drone how do I capture protocols to help

Multiprotocol TX Module
www.banggood.com/2_4G-CC2500-A7105-Flysk...der&cur_warehouse=CN

Taranis X9D Plus

Deviation what kind of transmitter would it be?

I only have the ones that I informed myself
the 4 in 1 module would not be enough?

could you make the test file available?

Bayang X16 AH
if you put both sticks diagonally inside the drone gun

Hi,
I ordered an XS809S and looking forward to have it delivered, I hope next week.

I have Deviation on a Devo 7e transmitter with NRF24L01 module. Would be awesome if I could use this Tx for my drone, so tell me how I can help please.

This is the drone I bought:
www.ebay.co.uk/itm/VISUO-XS809S-RC-Aircr...p2057872.m2749.l2649

Ordered a logic analyser from Banggood in the mean time as well, so if I have to measure out something...

is it possible to flash H8 Mini acro fimrware? without any problem? because both have F130G6.