Advanced Search

Do you want to implement some kind of Dual-Rate only for the elevator?
This could be achieved in many ways depending on your personal needs. Somebody wants to have Dual-Rate on the D/R switches for every function. I prefer using the FMOD switch to have all on one switch. Of course, you could use also the MIX switch but if you only want to limit the elevator I would use the ELEV D/R switch. If you need the three settings of 50,75 and 100 you should to use one of the three position switches to keep it easy (other ways are possible ). In my opinion the MIX should be for different mixing adjustments as long as possible. But these are just my two cents. If you are unsure please post your elevon origin and I could add the switch you want to have.

Servo reverse for Elevon mixing, I am not sure you follow what is an Elevon mix setup? Elevon is where only 2 servos move the only 2 control surfaces on a flying wing or similar - the 2 control surfaces must act as the elevator and also aileron at the same time. They are not only set for just elevator or only aileron, they must be mixed to perform both tasks simultaneously. This template works, with 3 levels of rates which affect the elevator/aileron at the same time, I have flown with this today.